• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Reasonable prices 300microns LAMINATE- where to buy?

    Hy i'looking for your experiences where to bye clear laminate for dirt bikes application at reasonable prices in EU and UK, i've been looking for Ritrama, substance or convex but only found webshops in US with heavy price to be delivered here. All expreriences are welcom, thanks
  2. Scratches during printing on GERBER 1 + FLEXISIGN

    Update I've tried with another vinyl (new roll) and the problem is still there, i have also tried with another Gerber that i have (1st model) and get the same problems. It's like the printhead seems to hot. With the DC4 when the foil scratches i reduce the Density or undo the Overlap or the...
  3. Scratches during printing on GERBER 1 + FLEXISIGN

    HY I own an oll GREBER 1 from a few days and i'm trying to print corectly with flexi, but but I still have the same problem of print scratches regardless of the setting made in FLEXI, I have been using the Gerber for a short time, I have a SUMMA DC4 and when I encountered this problem I lowered...
  4. Need Graphtec technician fc2250 flatbed

    Thanks, ok i'll do this and check. Late in the afternoon i had an email from a Graphtec technician told me that by opening the cut carriage and looking up to down between the back of the carriage and the arm, there is a free screw that can be tighten to reduce this freeplay, told me that you...
  5. Need Graphtec technician fc2250 flatbed

    Please how can i reduce the horizontal free play by the cutting carriage on the arm? i think it is excessive
  6. GRAPHTEC FC2250 getting offset gap while cutting

    yes it has happened to different files.
  7. GRAPHTEC FC2250 getting offset gap while cutting

    Here is what i have done since yesterday. I tightened the belts very slightly but I don't think that has anything to do with it, opened the cutter carriage where I discovered a piece of thin metal 2cm long which was magnetized on one of the 3 pressure drums I have to remove it, heat the room...
  8. Need Graphtec technician fc2250 flatbed

    Hy have you found where the various problems encountered with your FC came from?
  9. GRAPHTEC FC2250 getting offset gap while cutting

    Hy I own a fc2250 120 during a few days now and i'm facing a problem during the cutting event using 4 cut marks on job with GRAPHTEC STUDIO. The plotter cut the first shapes good but then it take a gap as things progress. The problem as begun with litlle shapes on jobs but now it has grown bad...
  10. Need Graphtec technician fc2250 flatbed

    Of course the model is discontinued and the parts are no longer distributed by Graphtec Here in France Graphtec's tech don't take a lot of consideration to care and help on an obsolete model, the opposit of SUMMA's tech in belgium who take time by mail and by phone even for an old...
  11. Need Graphtec technician fc2250 flatbed

    Can't you phone a Graphtec tech to get a first idea
  12. Need Graphtec technician fc2250 flatbed

    What's the problem?
  13. Looking for 1982 Maico 250 Graphics

    Thanks but i was looking for the OEM graphic template in AI or CDR to print. Maybe expressed myself badly
  14. Looking for 1982 Maico 250 Graphics

    HY In restoration project of a Maico 1982 250 MC, I am looking for the graphics template to buy , i'll need the full template side pannels, shrouds etc... Thanks for watching
  15. Looking for SignLab with thermal module and dongle

    Hy i've got the GERBER 1 version, Sure i'm also opened into getting the OMEGA, i've just heard that signlab would be more easier to use and more complete.
  16. Looking for SignLab with thermal module and dongle

    Also if anyone have the Gerber colors palette for Coreldraw would be great i can't find it anywhere without OMEGA CD's
  17. Looking for SignLab with thermal module and dongle

    HY We got an old gerber with an old windows XP including flexisign 8, i've been printing a few meters with the edge but i definitly find it hard to set and i've heard that Signlab pro with the thermal module allows to produce a lot more than the flexi software in a much easier way. Does anyone...
  18. Software Help ONYX steps creating ICC

    Ok i'll try that. But there is something i can't understand in theses ICC setups, for example i've found a good color profile for the RED but the density is too low even printing 100% in M,Y and RED ink. the ink limit is already set to the maximum of 400 in the ICC set ups. How then can i...
  19. Software Help ONYX steps creating ICC

    Oh that's pretty bad news for the green. ONYX support told me to try to save files in RGB and print. If you have an idea to match the Red closer please do tell me.
  20. Software Help ONYX steps creating ICC

    Here are pictures of what i want and what i get, i use the CMYKORdefault ICC and i can't get them with Swatch Books trying every settings . The Bright RED i want is always bloody or too orange. The GREEN i get is always poor in brightness.
Top