Search results

Be careful. Is that an Indonesia address? There are a lot of people who has sent money and never received what they asked for.

I dont know if you keep dealing with your printer but let me tell you I put back to work an old Mutoh alcon Outdoor. One month ago I replaced Pump and Cleaning Station I found in some Europe store. The printhead with yellow and Magenta colors is really bad so I will try to find a full nozzles...

After many years of working i have blamed all possible software packages and always ended the same. After resetting the whole pc erasing prior installations and reinstalling just the basics, everything is back to normal. A simple file damaged causes those random errors, besides trojans and viruses.

I use BarTender software. Piece of cake,

Anyone can tell me how to ask for solvent resistant ink tubing to replace the exit to disposal in my Mutoh printer? I mean, silicone, polyurethane, etc... I don´t know the kind of plastic used for it. I want to get some feet not the whole set in a tubing store not in a store of parts for printer...

If you want to look important, concentrated, like complicated, use Adobe products. If you want to look relaxed and fresh and can talk while chewing gum, use Corel. And get the same results. Look for Affinity, will soon end up this eternal discussion.

Anyone knows the kind of memory to upgrade this Mutoh Falcon Outdoor 46 printer? Just replaced with 2 modules 32 mb each and gave error. Do I need parity memory or some special module?

You can find small dampers on Ebay with tiny hole. Also can use Sai Photo print 8.6., 8.5, 7.6, 5,0...

Try to check and fix windows files and use CCleaner to clean register. It is always a shared file replaced by another program you have installed. If you have another pc try installing only the sai Flex, probably won't crash.

Look for i1share software program in Google, this is from from Gretag. You just place the colorimeter over the color you need to read and get the rgb values. You can copy and paste in your Ai or Corel..... Etc.

By the picture I could tell, maybe, it is dedicated Backlit material. I used a lot in the past when Encad was alive. Backlit brand Kodak reverse mirror printing, glossy on the front so there is no way to damaged or need to laminate besides is a 240 gms. strong resistant material. Lexjet has...

I have 2 Epson Wf1100 printers and one of them needed to replace the printhead. The printhead failed and the transistor on the mainborad went out too. I decided to ask for a new board so I found an Epson T1100 insteas of WF1100 and 2 new printheads. I replaced the parts and the printer is...

I will test them and let you know, thanks a lot.

Ok. Could a printhead be blamed? After reinstalling a damper and magenta printhead the problem arised. Maybe a drop of ink inside the printhead connector? Or damaged printhead which was working fine could cause it? I will check the transistors....

I just did and nothing happens, only the power yellow button.

No sir. Nothing, no display.

I just got the maintenance manual so I will follow it.

It all began with magenta ink not working. First the damper was replaced and pulled ink and made it work again. One week later the same problem so the same process was made but after connecting the damper and turning on the printer, did not turn on. All cables from the carriage and printheads...

What RIP are you using? If you have the USB cable to lpt1 you should have a port like USB--0 or something so you don´t need the windows driver. Actually I print on a Mutoh Falcon old printer on win 10, no driver fo windows but using the USB port from Photoprint. Check picture...