I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I've tried multiple profiles on different quality settings in in order to see whether that was the case or not. I've also downloaded the trial version of Onyx. We have been using Flexi thinking that it might have been a software issue.
I will say that multiple people have asked me have we accidentally put the wrong ink in the wrong place but I'll double-check that and that's not the case for sure.
yes we've been able to print good Blues in the past and nothing has changed other than maybe the material is coming from a different vendor. However the material isn't so drastically different that it would merit this kind of extreme change.
Was told yesterday by vendor that it may be a corrupted cart. Supposed just send them a picture this morning to determine whether that's the case or not. I'll keep you guys updated thanks for the help
It's doing it on all profiles. Was using manufacturer media types. Was having issues with ink curing. Just found out I could change the lamp settings if I created media types. I'm pretty new to all this. When new problems arise I'm at a loss.
Ok, so I've run every type of test, calibrated (not the best results) however all heads are printing correctly on Photo and Photo Plus. But my cyan looks no different than my light cyan. When I try to print darker blues they look more purple. I've thoroughly manually cleaned the heads. Any ideas?
I had the same issue not too long ago. The thing that worked for me was cleaning the crap out of the grit rollers. Use Isopropyl as it has no oil in it. After that, I performed a feed correction. Its on page 103 of the user manual. Here's a link in case you don't still have it...
I have a question that is related to this thread. Does the gassing process still take place if the printed material is still on a roll or is it a MUST to lay out your prints in order for them to get the O² needed to start the gassing process?
Sent from my Moto E (4) Plus using Tapatalk
The issue was resolved. Not sure what did the trick, as I took so many of the suggestions and put them to good use. Thanks to all that replied. Great to have a community of such great experienced printers that are willing to lend a helping hand! Again, than you all!
Sent from my Moto E (4) Plus...
I'm doing this now. Well, I've mopped the floor in front of it and since it is only 72" panels, cutting them one panel at a time. That's what I meant by making money on it. This machine has been a money pit.
Sent from my Moto E (4) Plus using Tapatalk
Your probably right. But when I say we just had a tech out, I mean yesterday. Machine was running smooth then (of course). I came in this morning to finish up and now this. I was using the edge clamps. Now I've your horizonal banding. I'm looking for my user guide now. Thanks for the help...
I forgot to mention I did clean them best I could. We had a tech out just yesterday who said he took care of everything and we were ready to roll. Has Avery just lost their standard of good quality products? What kind of material do you use?
Sent from my Moto E (4) Plus using Tapatalk
Its a BRAND NEW car wrap kit from Avery. If I run without attaching it to the intake roll, it runs fine. Stop not to be left unattended. I don't see how your supposed to MAKE money with this machine. Smh
Sent from my Moto E (4) Plus using Tapatalk
It does have that weight bar. It runs fine without it connected to the intake roller I would try the high head setting, only bad thing is I have already printed the entire driver's side on low. Just sucks having to run one panel at a time.
Sent from my Moto E (4) Plus using Tapatalk
Well, the problem is in the title. I'm running on Avery car wrap material. I make sure it's tight. I sit and babysit it. The previous got that really the XC got an external heat source. I'm wondering if it's possible that it's creating too much heat and causing the material to stretch? This is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.