I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Coolant level is good
No leaks
Neither heater turns on
Don't have SDS for thermistors
We haven't been instructed on how to flush coolant system. Machine is 6 yrs old. Coolant tubes have not been replaced.
No the button text does not change when I press it. Degassing pump turns on. The pump by the coolant reservoir is constantly whirring, but there's no change when I hit the button for the ink heater. I've waited a good 10 min but heating elements aren't heating up. There is an error that says ink...
No neither heating element seem to turn on. I hear a noise by the ink pumps on the right side of the gantry. I'm guessing that must be the coolant pump. But nothing heats up.
I have an Arizona 318 GL Flatbed with RMO. The ink heater will not turn on and marks N/A on the temperature. On the maintenance screen the temperature reads 9990000000000000000. Can anyone help me figure out what's going on?
Hi I have an Arizona 318 GL Flatbed. I just received a new bottle of coolant but it looks different from the previous bottle we used to use. Canon said this is the bottle they sell now instead. It's a clear liquid and the previous one was green. Is it okay to mix it with the coolant it already...
Thank you guys for the info. The problem was the recirculation valve for the white ink. I replaced it and now it works great. I did not need to replace the ink pump so I sent it back.
yes thank you I have done that and no the ink does not bleed out. I just wasn't sure if that was a pump issue or something else since I can hear the pump working.
Hi I've been able to print white no problem since March. Thank you. But now the white ink will not fire at all. I've replaced the ink filter. The bag is fairly new and full but no ink flows through it. I can hear the pump working but the reservoir does not filled up. Do you think it could be the...
I have an Arizona 318 GL flatbed. The white ink reservoir got low and has not been able to fill back up. I can hear the pump trying to work but no ink flows out. I've replaced the ink filter and when I open the bleed valve nothing comes out. Would it be the ink pump or could it also be something...
Cool I finally have the part thanks alot. Is there anything I should know about replacing it? Do I just turn off the valve? Should I empty the reservoir?
Does anyone know what the part# of those ink filters are? They keep trying to send me the ink filter that's connected to the ink bag. I keep telling them that's not what it is.
No the material doesn't matter. It'll drop on home position after I bleed the ink filter as the reservoir fills. I'll try replacing that filter on top and see what happens. Thank you.
I have problems running white ink jobs on my Oce Arizona 318 GL. The white ink will all of a sudden stop spraying when the reservoir is being filled and then drop large drops of white onto the flatbed or material. I've replaced ink the filter and bag and one of the hoses. Does anyone have a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.