I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Is it possible to coordinate an Edge Machine to a Graphtec plotter? Our HS15 plotter tied to our Edge took a dump on us and we need to be able to plot from it. Any ideas or suggestions?
Well, after doing some extensive research (and finally getting in touch with someone at Mimaki who knew anything about this)... I have found out that there is NO VEGETABLE OIL in Mimaki inks.
Yeeeeeeah...
This is a first for us. Our client didn't even specify if they did or did not want...
We're doing a bid on a big government job, and one of the things our client needs to know is (ready for this one?) if our inks have 20% or more vegetable oil in them.
:help
Anyone know what this would be for the Mimaki SS2 inks?
Thanks!
Recently we had a media sensor go out on our Mimaki (Error 50 Media Sense). I talked with our printer supplier on Friday and had a new sensor shipped which came in today. Well, it was the wrong part. The sensor is too big to fit into its cradle (see attached image).
It's funny because after...
So your test print isn't showing any yellow or cyan? That's weird.
I'd give your printer a really good cleaning. Remove the metal case at the left end of the printer (under the hood) and clean the sides of the print heads. Also give it a good 60 minute Nozzle Wash. Test print again and see if...
Well, I have Condition 2 (my perf cut) set to 25 for 3651 Orajet. If I set it to 24 it doesn't cut all the way through. I guess I've never really grasped adjusting the blade.
The JV3 is running great! We haven't had any more problems with our magenta cartridges (thanks again for you help on...
We actually got everything back in gear. I found the Menu Tree for the Graphtec online and just followed it to the language selection.
I've got the hang of how to do perf cuts now. The only problem is getting the blade to cut the perf line remotely clean. The plotter seems to "eat up" the...
Chad actually came in yesterday, but next time I see him I'll tell him you said hi. Will he know you by "Case"? Hahaha... are you Casey with Advantage? This is Jay with Everywhere Signs.
Sweet fancy Moses, my firmware is 1.6! I'll go to Advantage's website right now and get that firmware...
Our rep who sold us our plotter and printer came in to our shop today. He mentioned that we could do Perf Cuts on our FC7000 130... so I've been on a quest to figure this out.
I went to Graphtec's site and watched the videos on how to do Perf Cuts. There's a certain step I get to that I can't...
We've got a JV3 and I recently went through a printing-double-sided-banners nightmare. Here's what I do to print D/S banners.
1. The toughest part (for me at least) was getting everything to center. For some reason in Postershop, "Center" isn't necessarily center. Even when I manually enter in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.