Search results

Hi All, Very difficult to find information about the larger of the HP machines as I guess not as many use them. I have a L28500 that was being used and hadn't for a few months after an error. Would like to see if we can get some use out of it before throwing it out as it seems a waste. Ok...

Hi all, I did a quick search and couldn't really find much on this one. Ok, on of HPl260 is having this issue around substrate jam even with no material. Summary: - Wont complete start up - Jams about 1 minute in just to the left of home (look at the printer) and we can see the cart in the...

Hi All, Im hoping someone on here can point be in the right direction. I've searched high and low! We have a L260 we are still running and usually runs like a beast. As of this morning its having some issues. Yesterday we have the notification that the printhead cleaning kit needed to be...

Hi All, We have a handful of JV33's which as you can see from my previous post occasionally have a few weird things pop up. Thankfully for this forum much has been learnt! Question is in relation to manually flushing a head. Understand completely that this is frowned upon by some and ok by...

Hi All, Ok, so I've searched around all night trying to see if anyone has an answer to this. One of our JV33s is running into some issues with colour drop one long run full colour prints (imagine 20m of yellow we might get a drop slightly in colour). Print is all new parts (head, dampers...

Hi All, Ok, this one has me confused. We just got over our JV33 issue on one of our machines now this. We run a Roland AJ1000 ecomax inks etc primary used to print mesh. Was perfect a few days ago when it ran a full 50 meters Few points: - Test draw is perfect, all nozzles ok etc - Ink in...

Hi All, So I have searched around and tried to piece this together. I'm having a range of issues with one of our JV33s (we run several). Main points - One side of black is not firing (left hand side) - 100% not firing. - After a few cleans and washed I got a couple of nozzles but only until...

Hi All, So, I have a weird one that after many failed attempts feel like there must be someone out there with some ideas. Basically we have a need for a printed vinyl banner (Flexi face style) to be wrapped around timber frames much like you would a canvas you paint on. It is then stapled to...

Hi All, Ive done a little reading around and haven't found the answer exactly. We run a few jv33 running es3 ink. We use heaps of carts of ink and would like to run a bulk inks system on one as a trial. I've see people talk about the pressure/air bubble issues of these system as the heads...

Hi All, Weird question which I'm sure has a simple answer to someone computer minded. We previously ran Raster on another computer which was half the ram and cpu in terms of gigabyte etc. The new computer runs raster 5 really well, quick, displays correct etc. The problem is is you load...

Hi All, I've searched high and low to find an answer to this. Our JV33 machine is currently running on a computer fine which correct model and profiles. We are installing a new computer which now has Rasterlink on it ready to go. When we add the printer in printer management it only shows...

Hi All, Weird question and hopefully in the right area. We run a few JV33 and CJV33 printers that print pretty well day and night. Our temps we are running are 36 / 40/ 50 Celsius. What I'm trying to better understand is that a print that has finished and if no one was onsite for say 6...

Hi All, We have a jv33 and have run into something we never have before. We printed a large wall print , split into 6 panels. We ran the rip and printed all six one after the other.. When we rolled it out 5 of the prints are perfect, 1 of the 6 is really dark/colour is off. The one which is...

Hi All, Did a search and couldn't find anything similar...maybe this problem is just us. So we are based in a fairly hot high humidity area and have run into the ongoing problem of heat damaging our vinyls. When we leave any vinyl on a machine that is not in use it kinks and waves and is...

Hi, I picked up a JV33 recently and have been working through putting it back together and getting it functional. I have replaced most of the items that were of concern and got it running. Weird bit is now, with everything working, it won't print at all. No test print or print from RIP...

Hi All, Have done a fair bit of searching and haven't quite got to the answer...wondering if anyone know the answer to this. Currently I have an additional machine a JV33 160BS. As far as I can tell from the threads the BS is is different set of firmware? In the bible were someone has...

Hi All, New to the game and forum. Lots of great info and have done hours of searching, but cannot find what I'm after. Basically, I believe our pump under the capping station isn't working right in one way or another. Notes: 1. When completing a 'Fill Ink' in HD Maintenance no ink pulled...