Search results

Hi guys, been using stock profiles on rasterlink 5 for many years with limited color accuracy. So I decided to get the profiling software and start righting my own. Easy enough I found out. My work flow usually involves opening customer supplied pdf's directly in rasterlink, choosing my...

Hi guys, I have 2 jv33 160BS machines. Where we are located BS3 ink is costly so we decided to Install STS ss21 ink. The problem is I have tried dozens of different profiles for both Ss21 and BS, nothing looks remotely good or accurate. Eventhough I have a spectrophotomer, the mimaki...

Hi Guys, i need your opinion. So i have 2 Mimaki printers in my shop, a CJV30 and a JV33. both running BS3 third party inks. i an issue with the vendor for the inks and decided to switch to new vendor selling Bordeaux inks. the installed Bordeaux MS33 inks, which came with SS21 chips. Now...

I cut my teeth on serial devices in my teens, circa 1990. I didn't see an issue with scaling, although I once had an issue like that on a summacut D520. Had to recalibrate. I still cant wrap my head around this cut studio issue. And how bad it is. Roland is not exactly a cheap brand here...

Thanks netsol, that looks like its sorted now. Iv had a lot of experience with Mimaki and finecut, this is my first encounter with Roland. having messed around with CUT STUDIO these past weeks im not impressed at all. I cant find the equivalent the functionality i would have used daily on...

So i also downloaded the service manual, got the pinouts for the serial cable. setup the ports as directed in the manual. so i send a sticker setup with a panel size of 1190mmx300mm, set fine and fast for the two rows (roughly 150mm in the feed axis), then slows down. almost as if the cutter...

Show of hand, anyone encounter the same issue and resolved short of getting a new mainboard?

Hi guys, need help. I have a roland camm1pro gx 500. Connecting to usb has become an issue, I get a "device descriptor failure" error. Basically it becomes an unrecognized usb device. Iv tried 3 different windows 10 PC's, 2 different known working usb cables, same issue. The gx500 does...

My Length is 650mmx550mm. Iv done stickers like this many times. suddenly it picks the registration marks once, but not are i press plot from finecut or rasterlink. Im got medium pressure on all my rollers. you think i need to adjust.

Hi Guys Have a issue with my CJV30-130BS. I printed a few thousand 100mmx100mm labels with Registration marks through finecut 8 and coreldraw, ripped through rasterlink. I reinsert the printed media in cut mode on the panel, assign the print as straight as possible. do a mark detect on...

Thanks You make sense. Iv attached the finecut 8 menu youre talking about. are my setting correct.

Hi Guys , Anyone still using the cg 130fx cutter. I usually print and cut with my CjV30 -130BS. that seems fine sing the reads every set of registration makes printed before cutting a set. I recently bought a used jv33 that came with a the cg 130fx cutter. when i output from finecut 8, the...