I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I have a hedge wall that I would like to adhere 14mm PVC letters. The easiest way to mount the letters would be applying them onto a clear sheet of Plexi. Then I would only have 4 mounting spots. Instead of using a clear sheet, how else can I easily mount the letters directly to the hedge wall...
Hello, has anyone built a cube out of 1/2" Foam Board? The cube could be any size up to 4'x4'. My plan is to print directly onto foam board and connect the sides to make a cube. I am not sure the best way to go about that. Should I be looking into printing onto cardboard or building the cubes...
Note: The answer does not have to involve Fiery Impose. I am only looking for a way to setup double-sided 4x3 badges for printing.
I realize the question is pretty specific for the software I am using but maybe the solution is in preparing the file and not the software I am using. I am printing...
I am in the events industry and we print hundreds of booth id signs. We currently use a hole punch to cutout holes on the top left and top right corner of the sign. Right now, I can only hole punch about 10 sheets of 100lb card stock.
Is there an industrial strength hole punch that can go...
Hello, I made a big mistake, I cleaned the printheads of my HP 750 using isopropyl. I have since cleaned the printheads using printhead flush and did several ink purges but my print quality is not great. Is there anything else I can do besides cleaning with printhead flush and doing more ink purges?
I am getting the following "Error E-HB-91, Incomplete data received, but NO CRC errors". This happens when loading 2 sheets on the flatbed and trying to print a graphic to each sheet. I am able to print when there is only 1 sheet loaded. I have attached screenshots of both error messages. I have...
Hello, I have had some issues with my HP FB750 printer for some time. I have tried manually calibrating the printer or doing the automatic calibrations and cannot get better results. After talking with HP support, they recommend that I replace the printheads. The repair cost for the labor seems...
I am interested in creating a live photo mosaic wall. What software is being used to create this? I have done mosaics before but not sure how this is done during a live event where you take a photo, print it and then place it on a specific area of a grid.
We have a client who is looking to print their logo on a large, 4-5ft diameter balloon. Preferably made out of mylar and have a metallic shine. I have tried searching online but the majority of results I see are for smaller plastic balloons. I think the metallic shine is also going to be...
We moved our HP 750 printer to a new warehouse. We did our best to level the printer when setting the printer up at it's new spot. I am getting pretty bad print quality. It looks like printheads 1, 2, 3, and 12 are the worst out of the bunch.
What I have tried
- Auto and Manual BiDi...
Hello, I am looking for someone who sells 36"W x 8"H, 100LB Stock Paper. I used to get this from Lewis Paper in Carol Stream, IL, but they were recently bought out by Lindenmeyr Munroe. I called them, and they do not have someone who can cut paper. Does anyone know of a different paper supplier...
I am wondering where others get replacement parts for the HP FB750 printers. I am looking to purchase:
UV Lamp Filters: CH971-57226
HP Printhead Flush
Service Station Wipers: L1Q41-40002 or CQ114-40043, I am not sure what the right part number is for the HP FB750.
I got the part numbers from...
I am making a sign and want to attach 14mm Sintra letters permanently to a sheet of 6mm Sinta. What adhesive material should I use? The best material I have in stock that I can think of is using 1" wide Red Acrylic double-sided tape.
We moved warehouses and unfortunately our HP FB750 was left unused and unplugged for ~1.5 months until we could set up the printer at it's new location. Have the printer up and running but getting horrible print quality. Currently I have done the following
- Cleaned several parts of the printer...
Hello, I am having a print quality issue. I did a force drop detection and I am not getting ink from Light Magenta and Light Cyan. I have replaced the printhead and still getting an error. Both printheads look good to me. Is there anything I can do before I need an HP service rep? My printer is...
Hello, when I try to print something, I get an error for the UV Lamps, but this error does not show up with an error message. On the home screen, it just says "Error" on the right side.
The lamps are at about 650 hours and I am waiting for new bulbs to be mailed to me.
Potentially related...
Hi, my HP FB750 printer has mostly not been used for the past year and now will not print black ink at all.
What I did during the past year
- Clean the print heads, about every ~4 weeks due to COVID.
- Kept the printer on
- Made sure there was ink for each color
What I tried
- Check jet health...
I am planning on cutting out 3D letters for letters to stand on a stage. I am seeking out suggestions for a font that would work well for standing.
I was thinking about using the Bold or Black version of the following fonts.
- Gotham
- Avenir Next LT Pro
- Proxima Nova
- P22 Underground
-...
A client of mine is asking to print some text that matches their existing logo cling. The current vinyl is installed on the inside of the restaurant window.
Question
- Any idea what material was used in the attached image?
- I currently use vinyl like 3M 40C. How would I print a frosted texture...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.