• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help Roland XC-540 Blown Fuses - Ribbon Cable sparked and smoked!

    thank you so much! I appreciate your response! not rude at all I'm pretty much closed in on getting her back up and running!
  2. Need Help Roland XC-540 Blown Fuses - Ribbon Cable sparked and smoked!

    Ok, I've taken pictures of where I am so far. I've had my headboard serviced by a tech and he put in 2 new transistors and 2 new fuses. When I got my headboard back before I installed it back in I noticed some of my ribbon cables were crossed... 2 were in the wrong connector port. So before I...
  3. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Can someone show me where I can double check that I have the ribbon cables connected properly. I switched them to the correct position from visually looking at the other banks but now I just need to be sure I have it right!
  4. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Yess I think you're right. thank you when you said this I immediately went and checked the cable connectors and realized I had 2 cables crossed! when I switched them back to the correct connector that ribbon sparked then smoked! I then checked my fuses and I blew 1 of them. What should I try...
  5. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Thanks . when you said this I immediately went and checked the cable connectors and realized I had 2 cables crossed into the wrong ports! when I switched them back to the correct connector that ribbon sparked then smoked! I then checked my fuses and I blew 1 of them. What should I try now? I...
  6. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Thank you, Is this for one fuse? or do you get multiple? Also do you have a tech you use who I can ship my board to?
  7. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Do you know of any other techs that help fix boards?
  8. Need Help Blown Fuses on Roland SolJet Pro XC-540

    Yes he replaced 2 of my transistors. We put a new fuse in and now the yellow and black came back but the cyan and magenta are not firing.... i tested the fuse and I think it's blown.
  9. Need Help Blown Fuses on Roland SolJet Pro XC-540

    So I purchased a OHM reader to test the 3 fuses on my headboard and the readings are all different. I recently sent my board out for repair and my tech put in 2 new fuses and left my old one in that was giving good readings. I turned on the machine and did a test print and bank C is not firing...
  10. Need Help set ink type alert

    I thought about doing that but because the printer will not allow me to get itnto service mode. (its locked me out) im convcerned that if I discounnted the pump it will read an error that its disconnected and to reconnect it first.
  11. Need Help set ink type alert

    Thanks, do you know what the cleaning cartridge is used for? Im about to buy the below cleaning cartridge for 39 bucks at Grimco.com and allow it to dump that cleaner out instead of my expensive inks. What do we use the cleaner for? Do you think this would work? 20/20 Cleaning Cartridge – 220...
  12. Question Who can I buy the Roland After Market Inks from In Florida

    I am in need to buy the after market 20/20 Color Roland 22 Series Ink - I will be in Orlando on Monday so if you know any in Florda I am willing to drive and pick-up. I can't afford to wait I need it on monday for the light cyan and cyan inks.
  13. Need Help set ink type alert

    do you know if there is anyway to get around having the printer dump my inks? When I turn on the printer it asks me to "set ink type" when I select the option that its a CMYKLCLM inks it then asks me to confirm drain bottle is in place - when I select enter it one by one goes thru each ink color...
  14. Need Help Roland XC-540 Wrong Ink Cartridge

    Thanks Joe . - I called Grimco and they are sending replacements - I think you're right must be the chip Also, do you know if there is anyway to get around having the printer dump my inks? When I turn on the printer it asks me to "set ink type" when I select the option that its a CMYKLCLM inks...
  15. Need Help Roland XC-540 Wrong Ink Cartridge

    I keep getting this alert on the screen that says wrong ink cartridge when I put the new ones in. I am using 20/20 Color Roland 22 Series Ink purchased from grimco.com I have always used this type of ink so I dont know what is causing this. I should also add. Right now the printer is asking us...
  16. Setting up my Roland Soljet XC-540 HELP

    OK. Thank you I will try this. Attached is the type of ink I am using. I am assuming this is the CMYK MC type right? I am buying it for 85 bucks each
  17. Setting up my Roland Soljet XC-540 HELP

    Hi When I turn on my roland sol jet XC-540 it is asking me to select the ink type either Esol Max CMYKMC or E-Sol MAX LCLM - When I click esol max CMYK one it says install drain bottle then it says filling ink.... then it says remove Sol CL inks 2,3,8,9, When I power off and start the...
  18. Need Help NO CYAN AND MAGENTA FIRING IN COLOR BANK A! (ROLAND SOLJET XC-540)

    Hey thanks we replaced 3 fuses (F1 F2 and F3 on the mainboard) hope that's ok... no changes after we replaced them We also replaced the ribbon cables and continue to syringe to try to pull ink thru the adapter ink and we are able to pull "some ink" thru the tubing out. How do I know if there is...
  19. Need Help NO CYAN AND MAGENTA FIRING IN COLOR BANK A! (ROLAND SOLJET XC-540)

    ok, I replaced the fuses and still no change - not even a sign of in the right direction... any ideas?
Top