Search results

Try to shut off subpower and main power, unplugged and wait 10 minutes (actually this should be done immediately to re-set previous setting). If unsuccessfully then you can use empty cartridges as dummies cartridges and follow the process on the display.

do you hv mainboard still

Well it's owner printer's anyway but if Roland chose to locked the service mode out then make sure their respond time is appropriate or next day respond time. I heard customers make to wait weeks and no one show up and not give BS about it. Any delay could cause more damage to the whole printer...

The last time you mentioned to me is just enter service mode normally, what workaround for a reasonable price? Dm me the way bcos I like to fix my own printer

Customer: What happens to my SC,SP,VP,VS printers? my printer need service. Roland: Oh! those are considered older printers that we don't support anymore...throw them to the ocean but we can sell you new ones hehehe$$$$ Roland: Don't forget to upgrade your firmware to TRUVis2 ink ...beautiful...

This machine is pretty much the same as XC-540 but with UV lamps and if you need service manual DM me

Make sure you test it in user mode as well and restart the printer to see if the present machine give out any error. The last time I test this printer in service mode it was good but the moment I re-start to user mode, it gave me an error code (can't remember the number) that has a communication...

Ok Thanks

Do you have a way to work around the credential password into service mode?

Haha...first time I heard of that happened (damper collision) and I must say you pretty lucky the ink didn't split into your print head board.

Agreed! I am sure someone out there loses a big corporate clients because they unable to fix their own machine and yet Roland dealer fail in their respond time to come do it.

Yes! don't get the SG3 as they lock out the service mode and you won't be able to do simple adjustment yourself and have to wait weeks for dealer technician to arrive and they put your deadline priority last.

Hi! I have complete FJ540 printer and I check the scan motor can be use for SC500 but if you interested I will go to warehouse to look at it again. Price $200USD plus shipping charges from your location. DM if keen

Hi! Firstly check cables all connected nicely, did you mess with the print head lately or your room temperature too cold and any ink or cleaning solution touches any print head board(green board)...check all these first. Go to service mode and activate/enable the heater and let it warm up 10...

Yes main and panel board sold, only servo and power supplies

Read the above properly, I do have the boards but I need to look for it in my storage if Jason91 only interested. For board its away better to switch rather then repair.

Hi! I do have many many parts and boards so tentatively I remembered I sold main and panel and still have servo and power supply board( need to go search), I will sell both for $1450 + $75 shipping, It will pack and ship professionally to your location. For Servo and Power supply board, its easy...

It could be a short on your print head so disconnect your data print head cables and try to see if it power on. I have the same problem and found out that its not the main board and it could also be your power supply board but I don't think its your panel board. I do have VP power supply and...

Could I have one please? solokong@gmail.com

Ok I will replace data head cables to try first, thanks buddy