• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mimaki JFX200-2513 Idler/Tensioner pulley question

    Nothing at all was stamped on the bearing, but I do agree that F699ZZ fits the bill. JFX200-2513
  2. Mimaki JFX200-2513 Idler/Tensioner pulley question

    Well, that flanged (unstamped) bearing collapsed so we were able to take it to the bearing supplier; - none in the country unless we buy the whole pulley assembly ($1100AUD). We ended up putting four skateboard bearings into the Assy and a washer on the bottom to keep the pully at the correct...
  3. Need Help JFX 200 Loud Head Movement

    What bearing(s) does the big Y toothed gear use? My bearing has gone bad and I need to replace ASAP.
  4. Mimaki JFX200-2513 Idler/Tensioner pulley question

    I've got the same issue, but on the Capping station side of the machine. Bearing sounds crunchy and a soak with 3-in-1 over the weekend hasn't done much. By my approximation, the bearing is 25mm wide, but as the printer is still printing fine (and currently booked flat out), does anyone...
  5. Mimaki UCJV300-160 supply ink error.. HELP

    The error went away after a restart, and then performed perfectly since... Maybe a brain fart? We'll see. Otherwise, it's an impeccable printer. We've had it too long to return now anyway
  6. Mimaki UCJV300-160 supply ink error.. HELP

    I'm in at work just now to do routine maintenance in times of covid. The printer was in a crashed state 'pump sensor fail'. I restarted, did a nozzle check, and barely a single one fired. Turned machine off, back on, then I got this fill ink error. Trying the overflow now.... Fill ink only gives...
  7. illustrator large vector file question

    Object -> Path -> Simplify is a handy way to automatically reduce a ton of nodes.
  8. Gerber Edge 1/2 Printing on Backlit media

    I'm in Australia. Spandex have said that they can get our media punched, which is why I went ahead and picked up a Gerber edge from the classifieds. The ball is rolling now, hopefully it all works out!
  9. Gerber Edge 1/2 Printing on Backlit media

    Thanks FunkoTronXL. The Jv400 is a CMYK Latex printer. It's durability unlaminated is not at all good. The only requirements for the substrate need to be non-adhesive, with decent illumination properties. They're held in with a full perimeter magnetic acrylic face, so need to simply sit...
  10. Gerber Edge 1/2 Printing on Backlit media

    We are currently printing HEAVY CMYK on a JV400 latex to make these non-adhesive polypropylene signs, 950x200mm. It takes forever at 64 pass, and they're simply not durable enough. Laminating just blows the cost out even more, and doesn't look great anyway. I've used an Edge before, but never...
Top