• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. VP 540 head cable order

    Just confirming that I was successful in repairing the VP. The order shown in the picture is correct for anyone's future reference.
  2. VP 540 to 540i firmware upgrade

    Hi, some of you guys have done this upgrade. Can you advise how it is done and if it had any improvements?
  3. VP 540 head cable order

    All boards are working. Is this the correct order?
  4. VP-540 no power

    Issue resolved. A printhead has to be plugged in to get a temp reading.
  5. VP 540 Temperature is too low 0°C

    Resolved this issue. The thermistor in the dryer was changed. Also plugged in one of the old printheads and it got a temp reading from the head at least. The VP lives! Just to wait for new heads to come in and everything should be good to go hopefully. any advice on calibration that needs to be...
  6. VP 540 Temperature is too low 0°C

    When power the VP on we get this error. Second pic is from the service menu.
  7. VP-540 no power

    The Vp has powered on! We changed the fuses and a couple transistors. We have a new error. Temperature too low. is that because no heads are installed?
  8. VP 540 head cable order

    Hi guys I got a VP 540 without heads or cable. I've got new ones coming in but I don't know how to connect them. Can anyone give me a diagram of the carriage board and which cable goes to which head and which side?
  9. VP-540 no power

    My VP will not power on at all. I was not at the shop and I can't guarantee the accuracy of the report I was given. I was told the black head cables got ink on them and were removed. The removal was somewhat careless... The cables were sorta stripped off the backing and the metal pins were...
  10. where to get versaworks?

    I bought a used VP 540 but I didn't get the CD. is there anywhere we can download the software? I can't find it anywhere. EDIT: I now see that we can buy a CD from Roland which is so dumb we have to wait for an actual physical CD to ship.... Anyone willing to make an ISO image of theirs and...
  11. SP 540 internal error 0800573

    Thank you for your response. I don't know how to do any of the things you suggested. Can you assist with some instructions?
  12. SP 540 internal error 0800573

    Hello, anyone have any ideas what this is?
  13. How do you unlock the mutoh valuejet 1304 so it can work without chips

    Hi, send me contact also please for unlock person. I have a 1624.
  14. Need Help 1324x which damper correspond to which nozzle check?

    You are right! but for the purpose of the nozzle check and identifying which damper at fault it is accurate as indicated. I had a bad nozzle test on H as shown in the nozzle check. When I changed the F/H damper the problem was resolved.
  15. Need Help 1324x which damper correspond to which nozzle check?

    I found it, here it is. Now you know when nozzle check bad which damper to check.
  16. Need Help 1324x which damper correspond to which nozzle check?

    Ok so you guys familiar with the nozzle check pattern and the damper configuration. See attached image. Which damper corresponds to which printed pattern on the nozzle check?
  17. 1324x damper changing instructions

    Thanks for your response! As I said I have attempted it before by apparently its not my technique it is just the generic dampers that can't work for whatever reason... A technical service manual would be appreciated also if anyone has it!
  18. 1324x damper changing instructions

    Good afternoon, Anyone can provide me with exact detailed instructions on how to change the dampers on the 1324x correctly? Do the dampers need to be primed with a syringe? I have attempted to change dampers and used digiprint generic types but always I end up with missing nozzles. i have...
  19. 1324x - channel of yellow drops on long prints

    Thanks, I only have some digiprint dampers and those don't seem to work at all. I guess i'll have to order original Mutoh ones.
  20. 1324x - channel of yellow drops on long prints

    thanks but it happens after a while... I printed 20 feet yesterday then it dropped. A long clean brought it back and i continued printing (66 feet). It dropped out about 10 times during the rest of the print. The banner is going up really high so the thin line with slightly less yellow won't...
Top