Search results

Thanks, I will have to locate that option.

Here you can see the print furthest to the right. It was out of alignment a little bit but not horribly. The second image is of the print the furthest to the left. It is way out of alignment. This issue happens along the x-axis. Nothing makes sense to what the problem is. It is like the cut...

Hello everybody. I am having ass issue with our mimaki. When I try to cut wide batches of art I am finding different cut accuracy across the plate. for instance, If I cut 6 items, across a 30" wide piece of printable htv, the items closest to the home position (right) are fairly accurate when...

We are figuring it is a bad head. Everything I have tried has been to no avail. The head doesn't pass over any media during a cleaning cycle. The headstrike would have had to have been from the cap top or the wiper. I was able to use the nozzle recovery to turn off a chunk of black so that we...

I replaced the dampers this morning. No use. We still have the same section missing from the test print. Printing anything that uses yellow results in black lines in the print. No clue what is up with that other than a bad head.

I pulled the cover off of the printhead today. Just trying to see how difficult this head change is going to be. I know that the dampers have not been changed in 2+ years (it sat, basically unused, for the first year of my company having it). The second damper is split between yellow and black...

You don't, by chance, have a picture of what your test print looked like when it happened do you? Just trying to compare symptoms so I can discuss options with my boss.

It has the auto cleaning feature and it was being used. It just didn't receive a deeper, manual, cleaning.

If this is an internal damage is there anything I might be able to do? The wiper hadn't been cleaned for a while, (running a skeleton crew. It is my machine but I was not here for a few weeks) and I thought maybe it had gummed up and jammed the nozzles. but I figured a few heavy soakings would...

I have inspected the head. I do not see any scratches or anything. It printed a good(ish) nozzle check first. It was good in the sense that there wasn't a large chunk missing. We ran it through an ultra cleaning then got the missing section. There was no chance for a typical head strike between...

I have done both Custody was and Nozzle Wash. Nozzle wash has set, twice, for 99 minutes. No luck.

This all started yesterday. We had a fuzzy print. Ran nozzle check, ran cleaning, and now it's a mess

Now, on more recent Nozzle checks, the black is overtaking the yellow and cyan

Hello all, I am troubled. We had some fuzziness on a print yesterday. I figure it was from static. My boss suggested running a nozzle check, just to make sure. it was not good. We had quite a few missing pieces. No big chunks but a few here and here all over the print. So I ran a cleaning. Now...

It is a graphtec CE6000-60. My boss keeps pushing me toward Stahls' cadworx and vecotr cut 3 but I cannot get them to work. We design out of CorelDRAW so I need something that can load a .cdr file without being a plugin for Corel.

Hello Everyone, We have picked up a new (to us) graphtec plotter. The Software for it is Cutting Master 4. However when I install it on my main computer my computer crashes. I think it is a problem with having that and Rasterlink/Fine Cut on the computer already. My boss has set up a laptop to...

The print head was not seated correctly. I failed to make sure it was sitting level in the carriage. Once that was taken care of it all started working

I am not sure when the maintenance station was replaced, It is possible that it never has. The printer is less than 2 years old. I did replace the dampers and O-Rings when I replaced the head. It is also possible that it is not seated correctly. I cannot say for sure on that as my boss did that...

Hello all, I come to you, again, for help. I have been fighting with our Mutoh for two weeks. Friday, Jan 31, It printed fine. The following Monday, Feb 3, it showed a lot of missing segments on the nozzle check. I alternated between cleaning cycles and nozzle checks until I decided that it was...

It wasn't reading as empty. It was reading as no cart. Either way, it is printing.