• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Customer Wants Design Files

    I did a bunch of designs for another small business and they were specifically for cornhole boards. I have decided to cut ties with this company due to reasons that I don't care to explain, but he wants the designs so they can be reproduced later down the line. Is this something you would do? I...
  2. Customer Wanting Design Files

    I did a bunch of designs for another small business and they were specifically for cornhole boards. I have decided to cut ties with this company due to reasons that I don't care to explain, but he wants the designs so they can be reproduced later down the line. Is this something you would do? I...
  3. Old Screens

    Have 2 screens that have sat for over a year with the emulsion burned into them as I did use the screens. Any special or extra steps I need to do to remove the emulsion other than using emulsion stripper?
  4. Summa S2 T120 Media

    Anyone have the S2 T120 that can tell me if 48in or 50in material will fit? I cannot find the T140 (54in) plotter in stock anywhere and I need a new plotter. My printer is Mutoh Vj1204 which prints 48in, but I believe it use 50in material with it. TIA!
  5. VE Q54 Cutting Off

    Why would my cuts be off this much? Using Flexi with type 2 registration marks. For the life of my I can’t get an accurate cut. Seems since I had vinyl bunch up underneath the head I’ve had this issue. I am at such a loss and have wasted sooo much material.
  6. Mutoh 1204 new printhead no ink

    Just replaced printhead and maintenance station. Am not getting any ink to print. I’ve also tried pulling ink thru the drain line with one of the lines closed off. Thinking it may need a new fuse. I have the back covered pulled off but have no clue where the F2 fuse is located.
  7. Mutoh VJ1624 30” Media

    Just bought the printer and trying to get it set up with 30” media just so I can start setting up color profiles, etc. I do have 50” media. Is this supposed to be set up directly in the middle of the platen? Trying to test print and get error Measurement Error (Media Detection). Also, what is...
  8. Printing Gradients

    I am trying to print this sponsor for a racecar, but it is not blending correctly like it shows in Flexi. What am I doing wrong that it is not printing correctly? Images are attached. One image is how it is showing in Flexi, other is how its printing out. Thanks!
  9. Enduralam 2 problem

    My laminator was working fine for over a year now since I’ve owned it. My rollers roll forward and reverse, but not up and down. When not in use, I move the rollers apart and let the laminate hang so it doesn’t create flat marks on the roller. I currently have the side off the laminator, but way...
  10. Template Help

    I have a template from SRGFX that I already have my design completed with. How do I go about just being able to print and cut what design I have showing within the clipping mask without having to print the entire design and then having a bunch of scraps? I can only seem to add a contour cut to...
  11. Colors

    So I figured out my dull color issue by adjusting the profile in Flexi. In the image below, I wanted the purple and orange to be the same color as the logo used in the print. I used the color dropper to do this. The orange printed the same, but the purple did not. The purple printed just fine in...
  12. Can’t get solid colors

    I am having trouble getting solos colors to print from my Mutoh1204 using Flexisign. I’m printing on Oracal3165 and using Oracals color profile. Anyone have any suggestions?
  13. Outline Problems

    I’ve never had this issue before, but now this now that usually gives me two options is gray and does nothing. Anyone know why? It’s really creating a problem for me when I try to add outlines. Thanks!
  14. Layering Printed Vinyl

    I have a ton of racecars lined up to letter over the winter. I want to try and be as efficient as possible. Is it ideal to layer laminated vinyl? Example: Lay down the laminated base design that is laminated Then lay down the number, names, sponsors, etc. Is this suitable to do? I'm working on...
  15. Q54 Plotter Cutting Wrong

    I have no clue what changed either in Flexi or on the cutter itself, but it’s not cutting in the correct path. Out of 9 decals, it only cut one of them correctly. See pictures for example.
  16. FlexiSign, cutting overlays

    I'm making these decals for cups and the colors include silver and gold. I want to cut the team logo out in gold and apply after lamination, but I am having issues selecting the logo to cut only where it shows. When selecting to contour cut, it wants to cut behind where the names are (wants to...
  17. Need Help What Causes This?

    It seems as though enough ink isn’t being out on, but I’m not sure what setting to change to correct it. I changed it to 2 count, but that seems to lay too much ink down and smears as the printhead is crossing. Mutoh 1204 Using FlexiSign Using profile from Oracal site Printing on Oracal 3641...
  18. 1204 horrible nozzle check

    See attached photos. Printhead was just replaced end of January/beginning of February. Only have printed on adhesive vinyl and printable heat transfer vinyl. Just started doing this. Any thoughts on what could be causing this? Just replaced cap top. Cleaned under printhead using coffee filter...
  19. PS to Flexi

    I have a file (see attached image) that I created in PS. I need to get it into Flexi so I can print and cut. I am have a very difficult time getting this to happen as all file types create a bitmap, but I need to be able to contour cut around text and images. Can anyone help me out? I even tried...
  20. Race car Graphics Help!

    See attached photo for design. I’m trying to get each design piece to print without having to waste an 110in piece of vinyl since it is not a full wrap. The body of the car is red. The only way I can get it to print is if I print the whole design that I used to create the mask within the...
Top