Search results

Jayefkay531 what a great info, after every possible option I didn't success and now with this pretty simple fix I have "import media" option. It's like Christmas day for me.

Did you maybe try to manually adjust banding and that settings stay even if you switch media, it's not bad just to see to rule that out. Manual feed adjustment , I heard where guy constantly call service and have banding until service tech go to the location and see that they set manual feed to...

After switching the blade did you try test offset?

Hi! I have try everything from reinstalling and upgradeing but nothing. I can't tick the box where it should be the media manager, under installation I only have profile DL. Screenshot_19 is from the Youtube And Screenshots 17 and 18 are from first attempt upgrading, I have also grey out area...

You need to calibrate it, put the blank media that couse you a problem than run calibration and input the new measures. Also check measurements of printed media to see that printed stuff is not short.

Thnx balstestrat I find some video today where this guy just raise up leaver, position paper and lower the leaver (OPOS Sheet Mode). My mistake was that I have always press check mark on the screen. I also missing information about cutting to the closest "neighbor". How can I disable on summa...

I have been reading through all manuals but can't find how to speed up when working with printed stickers that are cut in sheets. I have summa D140 First of all is it possible to lift one roller so that when set leaver down, summa not waste time for scaning that roller. Is there option when...

I will try to reinstall again.

Under RipCenter v12 I don't have that option, and also inside folder I don't have media manager. This is only what I have

Thnx for the help, as I can see I can trade the V12 version but I need to add $2,295 USD, that is 30% more than I pay for the machine. On colorbase I find some profiles, but can't convert/import .OML because of this software that I have. Pretty much I am sure that OML is something like group...

Sorry for bringing this up from old days, but looking for some information. I have bought Epson S30610, pretty good machine for my purpose, I am printing 80% of time canvas material, but now I am getting more asking for PVC. Now my problem start on PVC, I have onyx rip center version...

I Will start from head lay on Rubber when head is parked. They deliver head assemblly on high settings and in 99% its not centred right, so you can get good suction and probably your dumpers don't have enough ink. Do you have these problems after cleaning cycle? With Chinese 3.2m solvent on...

Zoom image on the yellow, upper side...

I will send serial numbers to you tomorrow. Can you give me some information if is possible to set on Epson just to print with the left side of the head. On Mimaki where I worked before, I regularly soaked the head. The menu in maintenance has the option to move the head, fill it with cleaning...

I have a litlle order machine S30610, and i have problem only on yellow Chanel but i cant't clean that out. Can i do trick with paper cloth and epson solvent, and then place head over. Everything is clean on the bottom, before the machine come to me thay change the pump, and dampers. Temporary...

Thnx for reply, I just install rip and everything is working, I bump on one problem when start installing, when I try to import all profiles i get this error "can't read from inflate stream invalit bit lenght repeat". Only profiles that i can import was with "GS" marked, but Epson S30610 use GS2...

After we brought the Epson S30610 to my workshop, the guys told me that I could expect problems with W10, so they brought with them a backup PC with Windows 7 and the machine worked as expected. Can someone tell me if there are any problems with onyx 12 and W10, or if I should really install W7...

Hi! Today I have some weird problem on our mimaki machine, so the roll is perfectly aliened and rolled but i Get on every 2m somethin around 4cm skew, and I can't get rid of that, on the end of the shift i clean the encoder stripe and we will see tomorrow but is it possible to be something else...

Hello friends, I have been change job and right now i need to inspect the machine, now i have problem with mimaki cjv30 - 160 in fast print mode 6 pass it's scheme for foam letters, it's nothing crucial but the printer doesn't hit lines in scan direction, in feed it's ok. If i set to 12 pass...

Hi to everybody, My name is Boris I am 27 years from Croatia, I am hole my life in graphic enviroment I am third in generation related to Graphic industry. I have been working in Flexo, offset, digital and right now in 85% of my time is on solvent based machines. I was a reader of this forum for...