Search results

Just curious as I've been using flexi for a few years now with my hp360 but I only use flexi for the RIP and print portion and none of the design elements. Is there a cheaper option as it seems crazy to be paying this every month for basically a printer driver.

I don't know what up but it seems to be crashing more and running even slower lately. PC is only a few months old, nothing else running in background. Really should just move to adobe except I don't have the time to learn it.

So my L360 front panel power button stopped working a while ago. Wasn't a huge deal as I just open the cover to wake it up. I wanted to get in to diag mode which requires the front power button. After removing the screen bezel I found the switch worked fine but the .02 plastic part around it...

Printer is a 360. So I thought I had a bad LM head as I wasn't getting any ink. Did cleanings etc etc to no avail. Replaced with new head and it printed fine for a bit then stopped as well, guessing new heads come primed with a little ink in them? Well it looks like I just ran out of LM ink...

I replaced my LC/LM head today. Was delivered today and box has a 2024 date on it. Inside plastic pack has a 2024 date on it. Printer page says its out of warranty with todays date of install. Why would it be out of warranty?

Not sure why but certain colors have developed a banding issue. I did the nozzle check plot and replaced 2 heads although they weren't really bad. Aligned heads and tests plots seem fine. Cleaned mulriple times. This may have started after replacing the cyan cartridge last week. Could it be a...

Had this issue on another printer as well but the right side edge of wrap vinyl has some adhesive exposed. The first roller gets gobbed up with and and wants to pull the wrap up. I'm using the edge holder but if I don't feed extra vinyl to start it will get crumpled there. Can that roller be...

Contour cutting a 48" x 108" layout. It goes through and finds all the registration marks fine. Then for some reason starts cutting 2" out like it scaled the file smaller? Doesn't always happen, usually I try same file again and it's fine. Using gosign that it came with.

I have a VJ-1324 printer that hasn't been used in a few years. Was flushed after last use. Has a take up reel and flashed to use chipless carts. Found out the hard way that solvent printing wasn't for me as I just didn't use it enough and more ink was used running cleaning cycles than...

So I think I've narrowed down my problem to be with some of the ink supply tubes leaking air where they connect to the dampers on the head. I'm seeing some small air bubbles in the lines. I'd like to replace them but can't seem to find them or how to do it. They have a 90 degree bend in them...

OK I've printed this layout many times before now for some reason it want to fill in the background. Import to flexi from coreldraw been working fine. Did I change something by mistake!!!! WTFH!!

I know this is something to do with converting to rgb or cmyk but I'd like to fix it. I export a file from coreldraw to pdf and then import in to flexi 19 for printing. When exporting to cmyk colors it looks fine on the screen but the printer then seems to print it with different colors...

Basically the title is the question. VJ-1324 will give me an ink low warning. I will keep printing until it stops saying the ink cartridge is empty. When I replace it the old cart seems to have plenty of ink still left in it. How does it measure the amount of ink? Is it by what it thinks it...

Long store short, took head out and cleaned, replaced dampers as I had lost most of the black. Nozzle check looks good now. Printing from Flexi19 and I get some banding with blacks and a greenish tint. Turned off color correction in flexi and the black printed bright green but the quality was...

Just curious if anyone has tried Inkowl inks in a mutoh printer. I didn't see any posts for inkowl. They say they are the same as OEM but they all say that. Prices are very low so that make me think twice.

I have a VJ-1324 to start. Its old, I got it used and may not have been maintained the best. So it seems I've lost a lot of the black output in my head. Getting banding. It was bad before but I think I killed it by trying to manually flush it. When doing a nozzle check, one block of black...

Just curious who is the best to deal with and best prices on new print heads. Seems like I need a new head for the 1324 as the black seems completely clogged. Took it out and soaked it a few hours, tried to reverse suck it clean to no avail. I've been told once its clogged for more than a few...

I have searched and saw that this issue is somewhat common. My issue is I'm using the new Flexi19 software and no one seems to have an icc profile to work with that for Avery 1105 supercast. The flexi19 uses icc files and the profiles I get are ptf files. Even avery doesn't have it listed...

So I got a good deal on a VJ-1324. Printer in great shape, new extra 440ml inks, software and manuals. Well...... after trying to install the software it wants an activation code for the flexisign which the seller gave me but it seems this is an online thing now and he is still using with...

Looking to start doing small wraps for powersports ie, snowmobiles, motorcycles quad etc... After all the reading it seems latex is the way to go if you're not printing on a daily basis as the solvent heads will clog up. I was looking at a Mutoh VJ 628 but that is eco solvent so not sure I...