Search results

You can not do from service menu. Read my above post & manual properly.Everything is there. Just follow proper steps.

Make sure Encoder strip is not damage & it must be original. Re calibrate scan axis. After replacing belt you must re calibrate scan axis. Printer don't know where to start & where to stop. It will do left bump & right bump all those things in calibration. Read manual how to do. Must must pass...

Check this and solve. https://signs101.com/threads/l25500-trouble-after-belt-replacement.153328/#post-1470658

Find Hi, Check this. You will solve https://signs101.com/threads/l25500-error-86-01-in-the-initialization-process-of-the-carriage.149879/#post-1470662

Finally found solution>>>>>>>>> Replaced faulty cartridge & it work...........I don't know why it happen. Faulty cartridge remain faulty & new cartridge solve problem. I can use faulty cartridge as well by replacing chip on cartridge which is available from China. Thanks guys helping.

Finally found solution>>>>>>>>> Replaced faulty cartridge & it work...........I don't know why it happen. Faulty cartridge remain faulty & new cartridge solve problem. I can use faulty cartridge as well by replacing chip on cartridge which is available from China. Thanks guys helping.

Hello, Thank you so much for guide. I already disconnected all power cable many times. Also leave it for 1 day without any power supply. No luck at all.

Hello, Thank you so much for your reply. We already clean connector with alcohol, petrol, air it is all nice and clean. We also replaced new. All electronic test pass. No short found. Ink Supply System talking to each other & other parts. Air pump is ok. All Cartridges holding air. All air test...

Hello, I have HP Latex L26500 printer. In my printer Light Magenta keep rejecting cartridge after replacing to new cartridge. It show me broken bag and ink went to Light Magenta air tube back of printer. I have replaced to new cartridge after cleaning all ISS contacts & ink supply...

Solve Media Jam Error 86:01 ( This method is suitable for HP L25500, L26500, L260 or may be other model & barnd.) Theory will be same I think. If you have replaced belt or encoder strip or encoder sensor and getting media jam error 86:01 or any other kind of error please follow steps...

Solve Media Jam Error 86:01 ( This method is suitable for HP L25500, L26500, L260 or may be other model & barnd.) Theory will be same I think. If you have replaced belt or encoder strip or encoder sensor and getting media jam error 86:01 or any other kind of error please follow steps...

Solve Media Jam Error 86:01 ( This method is suitable for HP L25500, L26500, L260 or may be other model & barnd.) Theory will be same I think. If you have replaced belt or encoder strip or encoder sensor and getting media jam error 86:01 or any other kind of error please follow steps...

Hi AF, Today I have remove Sausalito PCA from L26500 & tested on L25500 printer. It is working fine. No error 08.11 on L25500. I will test now now Interconnect PCA. I have already install new in this L26500 but I will check again on running printer & let you know. 99.99 % sure it is working...

Hello AF, Thank you so much for your reply. I will test again by replacing above parts step by step & let you know. I try to give external computer power supply to motherboard but it does not start motherboard. Only orange light on motherboard. I try to jump start no luck. Reset switch on...

Hello, I have HP Latex L26500. I am getting 08.11 communication error on screen. Can you fix my printer? What I did. 1) Check all LED status as per HP service manual on Interconnect PCA. 2) Check all connection as per manual. 3) Reset CMOS by changing battery & jumper on motherboard. 4)Reset...