• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Epson f570

    a powerful cleaning usually does the trick for me
  2. Whats this material being used? Some kind of heat transfer film?

    Toner. The process is called sleeking, but you must use Toner as the laminator reheats the toner which adheres the film. If your printer has good registration, you can print the areas to be foiled, and re-run them through again to print around the foiled area. You can also reverse the process if...
  3. Anyone printing Note Cards? What printer are you using?

    What is your volume? I run a lot of 100# cover on our Fuji jpress. Might be able to help unless it’s just a few here and there.
  4. New flatbed help

    I’ll tell you that our Vutek heads are $3500 each. There are 12 unless you are running white (16w/ white). Would you jeopardize almost 100k in heads for a few bucks that you could pass on to the customer?
  5. Question What's your equipment setup?

    Vutek gs3250lx Zund G3 3xl Multiple epson printers Multiple heat presses ShopSabre Plasma 5x10 70ton Press Brake Fuji JPress Multiple Polar Cutters/Binding Equipment Multiple finishing tables, E.S. grommet machine ...etc.
  6. Bombarder Transformer

    Facebook has a neon group where you might have better luck.
  7. Metal cutting

    I'm on the west coast, but run a 5x10 Shop Sabre plasma table.
  8. Corten Steel Backlit Sign

    Check out www.surfinchemical.com for various finishes. I used it on a project and turned out great. Process was easy and I used their clear coat to prevent further oxidation. https://www.youtube.com/@surfinchemical895
  9. Pole Banner Material

    I use 18oz blockout and uv print both sides. Sew pockets top and bottom. No issues with any that I’ve done that way.
  10. Canvas printing too light

    I would bet that canvas is not properly coated for solvent inkjet use.
  11. Routing Table Cutting Mats

    Cutguru.com has similar mat to what we get from Zund at a fraction of the price. Seems to be similar material and thickness.
  12. display templates

    Zund design center
  13. Full black mouse pad print issues

    May sound silly, but the paper is on the top correct? I use epson paper/inks and never have an issue, but that looks heat related to me.
  14. Fun Situation.

    Get their non-profit tax id and write it off as 40 hours at your shop rate. Send them a docusign and release the artwork.
  15. Print Air Freshener

    We've tested a number of materials and the board that works best is board made of cotton with the graphics uv printed directly onto it. We tried adhering a sticker, photograph, paper, etc to a thick cardstock and everything delaminates with the oils. We printed directly onto the thick cardstock...
  16. Need Help Light pole banners supplier...?

    Just finished up 20 that I did for a local high school.
  17. I’m doing this.

    Don't buy anything other than chromaluxe metal. It's expensive, but by far the best quality. Most stuff comes from China, but if you're not comfortable buying direct, I'm sure Conde or JDS will ship your way. I plan on getting the f570 myself, but I was told by my supplier that its not good for...
  18. Vutek GS3250 LX UD....can somebody explain to me how to print double sided coro and get it aligned?

    Almost certain the MIRROR box in print options prints from the right side registration guide. If you have yet to use that registration block, you might want to adjust it's position on a small scrap piece.
  19. Question signworld perf?

    I bought a roll of their 13oz banner once and it was junk. Nusign has much better materials.
  20. Aluminum Welding

    There are tons of good youtube videos for aluminum. I taught myself how to MIG weld steel and TIG aluminum. Best advice is to get a 220v everlast TIG, bottle of argon and just go to town. Practice is key!
Top