Search results

What are you trying to cut? Sometimes doing a reverse cut can get rid of the overcut because it will be on the back rather then the front.

Yeah I never saw that before, there is an Ubuntu Post about resetting the password for your keyring, up to you if you want to go down that road.

other then vutek01 maybe "admin," I checked our list of passwords for that machine and vutek01 is the only one there that I have listed. Can you contact a tech that dealt with that machine in the past?

For my Colex that function is on optiscout, after I hit output there is another dialogue box to park the head in a specific location beore it starts to cut. You should call so you're not annoyed anymore.

Specifically, I am looking for boards in the computer cabinet, let me know if you have any so I can purchase it off of you!

Trying to get rid of this printer for space in the shop. I am in the NYC area and you can pick it up. I have a forklift to help load it on a truck. What I believe is wrong with the printer is a sensor but I am not sure. Deminsions are 4'x4'x8.

maybe the material or ink? could try different material and see if you get the same result or a different lot of ink?

It does looks similar to a static issue if I had one on the UV Printers, you could try something with this company that sells lines to put across the material. They have a bunch of stuff that might help, https://stopstatic.com/

You could contact Quality media, Frank Corey is the rep for the Northeast in the States. He might be able to you point in a direction for a Canadian vendor.

I usually make a working space of 48 x 96 is in Optiscott then under tools there is an option "Set Register marks". Video marks are placed in the corners of the working space, and this gives me a pho edge detect where a quarter of the video mark is on the board. I do a manual detect on the 4 the...

I was wondering if anyone knew a person or company to handle laminator repairs for the Los Angeles area? I have an AGL Encore that needs to be serviced

I only used an Oscillating knife for 1" Foam, What CNC do you have?

you can always try the generic Stacticide spray they sell on Uline, I have them around my machines. If you're noticing spitting of yellow or excessive wetting on the print head I would replace the damper

Styrene 20 mil is a tough material, I've found to be one of the most static material, are you running sheets or roll?

you could try Multipass high, which it has more overlap to the step. It will increase your time though

I am specifically looking for Drying PCA Board

You can always try, https://communities.efi.com/s/?language=en_US , maybe Beau will comment on it. What Vutek is this? and how did you bypassed the sensors?

You can unscrew the sensors and tape them together with some gaffers tape. The sensors aren't seating correctly and the vibrations while running periodically are knocking them out.

would be also an interesting 3d print project if you have access and time to one

Maybe Quality media can help? https://qmls.com/ or call the official guy from Kala Frank Romanello 214 766 7191? I pulled it from their website.