Search results

What size compressor are you running?

It bleeds out the air in the line and filter rather quickly but there is almost no volume. Im going to plumb in the 80 gallon tank and cut the air to the building and see how long that tank will supply for sleep mode. As far as why they are turning it off for 6 hours is to reduce maintenance on...

I did but got no reply lol.

Efi Tech said absolutely do not shut it down daily. no explanation as to why. i have an 80ish gallon tank sitting around. i suggested a small compressor maintaining the air at night.

I'm not positive but it appears that when it looses air its like hitting the e-stop. everything shuts down at that point.

I want to keep the air on and in sleep mode so I'm having to argue my side of it. I figured it would be an easy argument between a $3000 compressor and a $200,000 printer, but not so much.

So the company I'm working for is now shutting down the air supply every night. I'm running a Vutek H2000pro and need to know what the better option is. Should I shut the printer all the way down every night or leave it powered without air? I know the manuals say do not shut down nightly but...

The mechanical is very close to .030 judging by my .060 shim. ive got the sensor stopping it at exactly .060 when fully dropped. crazy thing is when i put material in like nitrile vinyl .080 thick i have to run a carriage gap of 0 to get it at a true.075 gap. if i put in thicker material like...

so i had the bottom limit sensor and mechanical limit setscrews come loose and carriage needs to be adjusted. due to covid we are not allowed to have a tech come out so im trying to do this myself. what i think is the mechanical limit shout be set first then bring the sensor down so it stops...

just found a leak on the valve. willing to bet that's the problem lol

gauges are reading 3.9 on white and 3.6 on cmyk

I had an ink pump go out about a month ago andfinally got the new one installed. When I fired the printer up after about a month of sitting the heads are just pouring ink loke they are stuck open. If I open a purge valve it is like I'm holding the purge buttons. Mainly the white doing it non...