Search results

If you're not getting ink during cleaning cycles, you have one of 3 things that could be causing problems. First, clean the rubber seal around your capping station. Debris on this seal can cause suction leaks during cleaning. Second, your ink drain lines could be clogged. Pour a little denatured...

doh.... you were quicker to the draw, adam! :doh:

Wrap Experts Killer Camo is one that has huge, non-repeating camo fills.

Hi Brian, Is Paducah close enough for you? I co-own Brushstroke Signs here and we do wraps. You can reach us at 270-442-8665. My name is Billy or you can speak to my partner Rob. Hopefully we can help you out! Thanks, Billy Meadows

I just put the 60 degree blade in the blue holder and it works fine for me. I think the "red" and "blue are just for quick visual identification (not positive though).

This is the firewall inside osX alerting you to a program that is tring to make an outside connection. If you select "Forever" then okay, it won't ask you about that connection again. Usually, if they have "apple.com" in the message, they are okay to allow forever. If you question the validity...

The Weeder Sheeter is the best thing out there. You are not limited to the length of the table you are working on. One person can apply tape to 20' or more of material without stopping. I have mine mounted on a small square tabletop with the weeder set 90 degrees to the sheeter. Pass the vinyl...

In Flexi, look under the Edit menu, look at Color Settings and check your Rendering Intents. Like mentioned earlier, the rendering intents for vectors and bitmaps can be set differently to achieve different outputs. Try setting the bitmap intent to the same intent as the vector intent and see...

:Big Laugh But if they WERE sexual partners... which would you rather have??? The one that is clean, streamlined, beautiful, and easy to get along with... or........ (wait for it.........) ....the one that's infected with viruses and stuffed with samples left behind by a plethora of...

There's a product called vinyl-off that I've had good luck with. It works through the vinyl to loosen the adhesive and it seems to soften brittle, cooked-on vinyl.

I did spec one out at the apple store... that's where I got the price I listed earlier... but on the $8000 price, I did not add the $3200 32GB ram upgrade because that's just plain stupid. You can get ram upgrades for a fraction of that through third party ram vendors. I also left out the 3 $300...

numbers aren't adding up... I smell a skunk... gonna take more than one roll for 30 8ft banners... and 720 sq ft of ink is more like $200 than $20... unbelievable... just unbelievable... :doh: someone call INS and the department of labor!!!

not being facetious but... where do you purchase macs that cost $15k? I recall the Lisa and some other early apples costing that much, but not in the last 15 years! (as of right now, a top-of-the-line mac pro with: Two 2.93GHz Quad-Core Intel Xeon, 16GB (8x2GB), Mac Pro RAID Card, 640GB 7200-rpm...

Yeah, run circles around it screaming and yelling trying to get all the Microsoft bugs out of it!!!! :frustrated: Sorry, Josh... that was too easy of a target not to take a jab at it!! :ROFLMAO: Seriously... I use both, but I do prefer my Macs... Like you said grampa dan, "it seems so...

Both brands are great. When I weighed the choice between Roland (print and cut) and Mutoh (separate printer and cutter), I had to look at the type of work I do. Most of my jobs get laminated, so that means printing, removing material from the printer, laminating, and then returning the material...

Stymie Black looks like a cleaner version of this

I just went through this a few weeks ago. Pour cleaning fluid or denatured alcohol through the sponge and capping station. Squeeze the lines and try to break up as much of the coagulated ink as possible. Try running a pipe cleaner down the tubes if you can get down them from the top. Also use a...

There is a setting for "prevent stick"... turn that setting off and it will stop pre-feeding before printing.

Mutoh has the new 1618 Dual Head machine with 480 sq ft per hour capability. If you already have ValueJets, why not stick with the same brand for consistency and less of a learning curve...

Here's my method... Outline Text Copy and past text behind original text (Command C then Command B) Change fill color Offset Path Option click on the "Add" button in Pathfinder menu (this welds fill and outline into one shape) This should leave you with the front, original color...