• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. how do you select a %age of a pantone colour in Flexi?

    I use the lens tool. Fill your object with the PMS color, then add lens at the percentage you want.
  2. 50 Yard signs

    From a look at the web site it appears that for that price they are just giving you the sign with no frame. If they printed those using an off-set press with black ink and colored stock they could be making pretty good money depending on what type of press they were using.
  3. 3mm to points?

    Current DTP point system The desktop publishing point (DTP point) is defined as 1/72 of the Anglo-Saxon compromise inch of 1959 (25.4 mm), it is approximately 0.0139 inch or 0.3528 mm. Twelve points make up a pica, and six picas make an inch.
  4. Q: Best way to accelerate a Diage Laminator

    You could try this method for setting your pressures. 1. Take a piece of copy paper and cut it into 1" strips. 2. Place a strip of paper between the rollers at each end and in the center. 3. Drop your rollers until they touch. 4. Slowly tighten until paper strip does not move when pulled. 5...
  5. Any ideas why the curvy test print?

    If you have a spare you might change the printer head cable, or you could swap it with one of the other cables and see if the problem clears up or moves.
  6. jv3-75sp11

    You might want to sign up over at MimakiJV3Printers group at yahoo.com. That forum is for JV3 users.
  7. Does everyone have no spine?

    If you have CorelDraw there are a couple of different ones in the medical section.
  8. Does anyone recognize this font?

    Thanks, I can make that work! Appreciate your help. Steve
  9. Does anyone recognize this font?

    I know I have seen this before, but I cannot remember the name. Any help would be greatly appreciated! Thanks, Steve
  10. FC7000 reg mark issues

    Have you tried using type 1 marks. I have never been able to get the type 2 marks to works on my machine, but have very few problems when using the type 1 marks.
  11. Cannot open port

    Have you tried turning off the printer and the letting it reboot? Sometimes I have also had to reboot the computer.
  12. Disposal of Mimaki waste ink

    We contacted a Hazardous Waste disposal company (I think it is SafetyKleen) and purchased a barrel to pour our waste into. When the barrel gets full we call and the haul it off and dispose of it. Also just saw last week that Roland is now taking back empty cartridges for all the Roland inks.
  13. Bigdawg

    Best wishes to Jeff and Stacey! Our prayers our with you.
  14. anybody here run a jv3 with Flexi 7?

    I run a JV3-160S w/Flexi 7.62
  15. Jv3 / Flexi 7.6 stops mid-print

    Try clearing preferences and resetting to defaults.
  16. Graphtec FC7000-130 Not reading reg marks!

    I have the Graphtec FC7000-160 and I have never been able to make it read the type 2 marks. However, it does fine if I use the type 1 marks. Go figure! You might try changing to the type 1 marks and see if it works.
  17. Standard AI generation

    Have you checked to see if there is a "mask" over top of your image?
  18. corel convert to flexi

    Should be able to export from Corel as .cmx and open in Flexi.
  19. Does anyone else have this problem

    I think part of your problem might be caused by the wheel being partly off the material. Try repositioning so that wheel is completely on material and see if that does eliminate the pucker.
  20. Not printing clipped images Help!

    Can you convert to a bitmap and print it that way?
Top