Search results

I tried heat to take out the scratches, to no avail. I used a white teflon squeegee, an orange squeegee with the black velcro on it, as well as a felt half-moon squeegee, and all of them scuffed the vinyl. Usually a few scuffs aren't a big deal, but this is just gloss black on the roof and they...

I've got a roof to wrap with gloss black vinyl. Applied it this morning (Oracal 751) but my squeegee(s) (I tried multiple brand new squeegees) scuffed up the vinyl pretty bad. If I laminate with Oracal 290 will that prevent the scuff marks? I'm not used to wrapping with solid colors (or without...

Anything under 30" I usually tape by hand. Here's a quick diagram of how I mask 24" vinyl or smaller.

In Illy, select all and go to Object - Path - Outline stroke... I'd remove all those goofy /////// behind some of the text, and move any of the text that overlaps any of the lines, and then weld everything together. Expand it, and there is your all black outline, ready to color. *Edit* Make...

I've been using flexi for about 5 years now(started on Casmate then Inspire in the sign industry) and can use it very effectively. I do all of my cut vinyl designing in it, and practically ALL of my vector cleanup. I switch between Flexi, PS, and Illy pretty seamlessy through most of my jobs...

If your VW is updated, in your templates that you base your template on are the RIPC base settings. Select the appropriate one and write your profile the same as you always have. I've successfully written 5 profiles with the new settings, and they are remarkably faster.

I've had this happen with 3641, put never with vinyl banner material. With the Oracal, it was a heat issue. I dropped the heat and and the roller marks and discoloring went away.

I believe GoMedia has one in their tattoo packs...

It works the exact same way.

Sorry, this picture was taken from a side angle. The banding is running horizontal with the heads. As for the heat settings, I've printed everywhere from 35c to 50c, makes no difference in the banding, just the darkness of the gray. As for the encoder strip, that has been cleaned as well.

I've got an issue that I've been working with for about the last month now. I'm getting light banding that runs the entire length of the print, and is only noticeable on grays. I've been working with a few tech people over the phone, and even had my dealer techs in here working on it, but...

Bingo! Kinda funny though, since the company that sold us the Roland set up my original settings, and had them set for perceptual for rasters and relative for vector..... oh well, THANKS!!!!

Jen - yes, all of my colors are CMYK, not RGB, but I double checked to be sure. and George, I'll try the expand appearance. Thanks for the help guys!

cmyk, haven't tried a .pdf yet....

Howdy. Having a few annoying issues here, wondering if anyone has a tip or 2. Ok, designing in Illustrator CS3, rip is Versaworks 2.41, printer is Roland Versacamm VP-540. I've been having issues printing when I use filters in Illustrator(ex. drop shadow, outer glow....). When I print...

search the site for more.:Oops:

Bitte.:cool:

n/m, i was on hold for a while here you go: http://www.1001freefonts.com/sci-fi-fonts-4.htm it is colony wars

whichever font it is, it should be on 1001 free fonts, as it is on their buttons. sorry, don't have time to look for you. http://www.1001freefonts.com/notfound.html

Wow there's alot of nice people on here. Thanks!