1624

Recently our 1624 is just very loud when it's printing. I've done the maintenance - cleaned and greased the carriage the head slides on - still loud. Is there anyone who troubleshoots this stuff? I'd hate to just start buying and replacing parts without knowing if they'll solve the issue. I...

I have a 24 Inch Wide roll of this Holographic vinyl material. I covered the senor under the pinch rollers to make the machine think it's filling in the width. How can I set the media on the machine to recognize its shorter and also to get it to stop saying undefined media?

I have a client who needs a certain vinyl wrap that I can't replicate the effect with on my printer with a regular blank 3M IJ180. Am I able to print on it and if so what issues can I run into and what profile should I be running?

Hello! I am printing with a Mutoh 1624x. While printing anything over 2-3ft I notice that the print color kind of washes out. For example I’ll start printing a nice yellow and once the print gets about 2-3ft long it starts printing like a pastel color yellow. It’s not instant, it a very gradual...

well, I have straightened out a head height issue on my 1624 and it now prints like a new machine. ....with one exception: FISHEYE!!! Please take a look at the print images. this is a 720x720 profile. Also, no heat to avoid head strike. ((use heat????) Many thanks in advance for any replies.

I have a 1624 which has overall been a reliable machine. Lately however, I cannot get a good print out of it to save my life. - Seems that there is a lot of hazy printing/misting going on, as shown in the logo print shot where the blue haze/misting is printing into the white areas where it does...

I have a Mutoh 1624 and a ValueCut cutter for immediate sale. I closed my in-home business due to personal reasons and have had these machines in storage for quite a while. I'm selling them AS IS. Wanting to sell quickly so make an offer.

Hello all - Looks like we have lost almost a full black ink channel in one of our 1624's. Has anyone here replaced a head by themselves before - and do you think this is what needs to be done? We just put in a new maintenance station around a month ago. Nozzle check comes back great with the...

Hello all- We are all a little confused here at the shop. We have two 1624's, both have the material take-up reel/system (VJ-16TUP30U). On our oldest 1624 (somewhere around 6 years old, still going strong), we are having an issue where the take-up reel is askew. It is causing the material to...

I was wondering if someone else has ran into the same problem we have with trying to calibrate profiles for our printer with the Spectrovue. We have a Mutoh Value Jet 1624, Onyx 10 Poster Shop and a Spectrovue VM-10. When we go to Media Manager in our Onyx and try to edit a profile that...

Hi everyone, I have a problem with my mutoh 1624. The Y is missing...The other three colors are there, but the yellow is missing. There is ink reaching the dampers, but still the machine doesn't print yellow. Any suggestions?

I have been a Roland guy since 2006. after my xc-540 I could not be happier. I recently purchased an xr-640 and could not be more unhappy and unimpressed. It is grainy, really hard to get printing right and is a nightmare to deal with the new media loading system. Banner rolls are thicker and do...

Now thru September 30th, 2013 trade in any wide format printer 30" or larger and receive huge discounts on the ValueJet 1324, 1624, 1638 and 2638. Terms and conditions apply, contact GRS for more details. Click the below links for more information on the printers. Mutoh ValueJet 1324 - $4,000...

I have a banding issue that is very noticable on the blue fade that I'm printing that's 130" long. I have made sure my feed rate is adjusted properly and have tried the effects "fine & fuzzy, fine & wave" as well as different heat levels, but it still seems to band on me. Some of the banding is...