cables

I have a Roland SP 300 that keeps blowing the F3 fuse when I plug in the servo board. I have installed new heads and have swapped cables to make sure both heads are fine. Any Ideas? Thanks in advance Kevin

This is what my nozzle check looks like notice the blue and black nozzles stay on: Things swapped out or checked: 1. The print head has been verified to not be clogged. I manually applied (using syringe) and verified that cleaning fluid was making it all the way through the head. 2. The...

I made the stupid mistake of powering down one of my printers without setting the periodic cleaning to on and then leaving on vacation for a month. Of course when I returned a couple of the heads were blocked. In the process of trying to bring the printer back to life I blew a mainboard fuse...

I have a VS-640 and after printing for a few minutes into a job it just stops printing. It doesn't beep or anything, it just stops. The LCD display on the printer says "NOW PROCESSING" and Versaworks shows "printing" as the status. After sitting for 10 minutes or so, it beeps and show "INTERNAL...

Please Help. we own a Roland soljet pro iiv sc-545ex. we have a "Sheet Set Error" we already make sure the media is in the right place. the pinch roller is within the silver reflective markers. Do i need to change anything or clean somewhere in the printer. when i do the Linear Code...

Hi, I am new to the sign biz and purchased a Gerber Edge 2 and an EnVision 375 from an auction. It did not come with cables but i determined that I needed to get a 25-9 pin com cable. I purchased one from eBay but it seems that the CQMgr does not like it. It keeps telling me it has a comm issue...

Hi, we need an idea what is going wrong with our machine please. Sometimes it will print perfect, other times it will start horizontal banding halfway through a print. We have had a tech come out a few weeks ago and tell us the black print head needs replacing. But we also have a good very...