• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

capping

  1.

    Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...
    • graphicsphere
    • Thread
    • adjustment capping drip flushing ink nozzles position roland station vs-540i
    • Replies: 5
    • Forum: Roland

  2. XC-540 Soljet III capping station lists/tilts to one side when rising.. okay? adjust?

    Hey! I was recently performing a height adjustment to the capping station and I noticed something weird that bothers me. The capping station has a slight (but noticable) tilt to it, that changes direction depending on the direction of travel. When moving down, it tilts slightly to the right...

  3. Question VJ1204 pump issue?

    Hello. Having a little issue. Changed the maintenance station 2 weeks ago ( second one in 6 years, not bad ), printer worked great for the 2 weeks. Yesterday, went to print and barely had color down on media. So no problem I thought, seen it before... took the capping off, cleaned all the tubes...

  4. VG540 Cutting problems. The printer heads are not staying in the capping area

    Using VW dual to do the job The printer will print out the job and then go back into the capping station Then the cutter and the heads will come out to cut the job. It causing a motor error to happen during the job Has this happen to anyone?

  5. GS6000 Capping Release

    Does anyone know how to manually release the capping station from the head on the GS6000. My understanding is that there is a lever but I don't see it. Thanks a million...
Top