cutting problem

I have a Graphtec FC7000 that has been having a cutting issue lately. It either does not cut well enough to weed easily or it scores the paper causing it to tear off the top layer of backing paper and leave it behind on the letter. I put a fresh blade in a few months ago when i began having the...

I have a graphtec FC8000-130 plotter and I am not able to connect to it from my software. Standing in front of the machine it turns on and measures the width of the material and I can even change conditions and set origin for cutting as well as test cut the material. I use both cutting master...

I am using SignGo V.1.12 with a Desay Master XY 300 Cutter/Plotter. When doing cuts, it sometimes goes nuts. Example I had a cutout that was 5" x 60". First cut went perfect. The second cut went half way and then the roller stopped turning and the cutting head went straight across the vinyl...

Wondering if anybody out there can help me with this odd issue. I am using Sign Wizard 6.5 with a Camm-1 Pro GX-300 and everything is cutting 2% smaller than what it should be. (i.e. 100mm box ends up cutting 98mm). It could have been happening for quite a while as I have only noticed it when...

I'm pretty new to the sign business and have now taken on some jobs that are slightly beyond my know-how: What is the consensus on contour cutting FoamCore/GatorBoard, etc.? I have two projects, both vinyl prints mounted on GatorBoard, that need to be contour cut. One is essentially a 4'...

My Envision 375 is consistently cutting to the right of the target (positive X-axis). Put another way, the cut is near perfect on the horizontal target line but to the right of the vertical target line. Of course, this adversely impacts the rest of the job. No problem sending the job from...

I am using the mimaki cutter to cut through convex 12mil material and can't seem to cut through. The blade also slightly scratches? Anyone know a fix for this problem? Cheers Brett

I have a graphtec FC-7000MK2 with Illustrator. Off late it has started cutting straight lines with curves. Pls check the attached picture of a rounded rectangle cut on a oracal Vinyl where the upper line is straight one but the bottom one is a curved one..Both were supposed to be straight ones...