feed

Hi, I have a problem with my Mimaki CJV30-100. Want to cut squares of regular white sticker vinyl, size 199 x 199 mm. The easiest and quickest way to my knowledge is to draw that square in Illustrator and using the Fine Cut plugin to send it to the printer to cut. Works, but the final size of...

Printed about 5 yards of 54" material (Avery 1105 vinyl). Went to load the next roll and now it's bunching up in the middle after it's been loaded and does its precheck. Everything was going fine with the first roll. Tried a new roll of material same thing. Have adjusted the feed roll so it's...

Hi, can anyone tell me if there's any way to adjust the amount of media which is automatically fed by the machine after it cuts the sheet? The reason I ask is I'm using the custom sheet setting to improve accuracy when cutting stickers. I've see the versaworks to cut 10mm after the last print...

I'm using a fairly old Camm-1 Pro and it's been very glitchy lately. The most recent glitch is all of a sudden it's been feeding the material way too fast. I don't mean the regular speed setting though. It's cutting at its usual speed but in-between cuts, when it's moving to the next area, it...

The start to my problems... when I load media, restart the machine or anything in general, the media feeds about 4' of material, then goes back through and out the back of the rollers. When I force the material to be in the correct place, the machine reads "Plot OK", but will not cut, test...

Hi all, I'm new here - found this place as one of the last likely to have people with Encad NovaJet knowledge, and I'm hoping someone can help me troubleshoot. . . My printer recently started having a couple of intermittent problems. Once in a while, it would unload (backward-feed) the...