gerber edge

I have a Gerber Edge im looking to get rid of. Need to move fast. Texas Based email at graphics@slmracing.com for the fastest reply. more pics on request 1 GERBER EDGE FX PRINTER 15IN F010704044 1 GERBER enVISION PLOTTER 15 IN E150803005 1...

Hello, earlier I was printing using my Gerber edge and I am not very knowledgeable within the omega software. But I was making some football helmet decals and had to overlap black on a couple images and the black didn't overlap very well. I am unsure as of why but I thought it might have...

HY We got an old gerber with an old windows XP including flexisign 8, i've been printing a few meters with the edge but i definitly find it hard to set and i've heard that Signlab pro with the thermal module allows to produce a lot more than the flexi software in a much easier way. Does anyone...

Hi, I'm trying to print some welsh dragons using CYMK but the print doesn't look right. The file I'm using is a vector file, I have attached an image, can anyone help me please. I'm using flexi with XP.

We've been running an original Edge for a while now, with limited issues. We recently picked up an FX and it came with a foil caddy installed. It prints fine. Since I have ZERO experience with this particular machine I am not sure if there is a trick to removing the caddy or if the machine is...

Need some decals printed on an Edge 2 or Edge FX and cut out...anyone out there selling wholesale?

We are selling our Gerber Spectratone Binder at Auction, just North of Indianapolis, IN on Thurs 10/26/17. It includes extra prints that we have made ourselves, which include some Zero9 and Apex colors, plus a set of prints that we made of PMS colors converted to RGB and printed in CMYK. I...

Looking to sell my gerber system. I have a gerber edge along with the gerber gsxplus plotter both work flawlessly and have been well kept. I just don't use them enough and need the space.. what is a fair price for today's market for a system like this? Located in the mid Nebraska area.

Hi All, I'm kinda new here and this is my first real post. I'm looking for some help / advice on how to get my Gerber Edge and GSX plus plotter up and running. I just picked up a Geber Edge and a GSXplus plotter. It was a good price on kijiji and i thought, why not, i always wanted to use one in...

I recently purchased a used Gerber Edge 1 and it prints awesome other than one important flaw with the reg marks. For starters I use flexicloud and from there I apply a contour and send to production manager. It shows my 4 points in the panel to be printed along with my graphic. The problem is...

To admin: Please relocate thread if this isn't the proper place to post. THX I just recently acquired a Gerber Edge & a GS-15 plotter on a deal I couldn't turn down. The printer has a bad head. 2 inches of the vinyl has several pixels burnt out. But I can work around it. I have the PC tower &...

SOLD

We are having trouble with our Edge (older version) pulling the vinyl and then the printing is off when it is cut with the plotter. Has anyone had a problem like this before? We can't figure out what the issue is. It doesn't happen all the time and seems like it happens during longer runs. Any...

Just over a year old. Including 12 or more foils. Asking $18,000 for the pair, include USB cables also. PM for more info, located in West Central Indiana.

All the following equipment has NEVER been used in a sign shop. Therefore, the equipment is like new with very limited hours of use. The deal includes the following: Gerber Edge Gerber Envision (24") Gerber Color ID Gerber Omega 4.0 with USB interface 3rd party vector software Gerber...

We recently upgraded from Omega 3 to 5. Now that we have upgraded, whenever I open or import an AI file, the file will not print to our Edge printer. We are getting a GQMgr error stating, "Incorrect funtion. (1) File gq_pftp.cpp Line 1053 Try Again?" If I select yes, I get the same error...

Gerber Edge Thermal Printer, Gerber en Vision Plotter (18") (still being sold today by Gerber), Gerber Color ID, All cutting supplies, approx. 20 rolls of a variety of vinyl, approx 35+ ink cartridges for Edge, two (2) Iron racks for holding vinyl rolls (Wall Mount), Omega 5.0 Software with USB...

Yes I am a newbie and am in search of some advice :) I have been researching for about a month and still am not sure which direction to go in... I am in search for the best printer/plotter machine to invest in. I mainly want to design decals, stickers, and venture out into designing apparel...

OK, Got the shop setup and cutters working fine but, when I send a file through Omega (2.1) get no printer response, Tried deleting and reinstalling printer, restarting both software and windows after changes--NADA. When printer is turned on it initializes fine and shows offline, change it to...

Hey, I have an opportunity to purchase a sign shop's equipment that used Gerber printers, plotters and software. I can buy all of this for $3000: Gerber Edge, 1- GS 15, 1- GS15plus, 1- Allen 30" cutter MD 830, Graphics Advantage Omega software 2.1.0.21, Composer v 2.1.0.457, tower computer...