gerber edge fx

I have had my Edge FX for around 10 years. The cartridges have never loaded as easy I felt they should, usually have to jam them in with a fair amount of force. The flapper door also get caught on the side, like something isn't aligning properly. Today, the top doesn't seem to be lifting all...

Hey all! Gerber's tech support is closed on Fridays, so while we wait, I was hoping someone here might have an answer. We have a Gerber Edge FX that we use with Flexi and send the RIP files through Flexi's Production Manager. There are two computers: Computer A is running Windows XP and has...

We've been running an original Edge for a while now, with limited issues. We recently picked up an FX and it came with a foil caddy installed. It prints fine. Since I have ZERO experience with this particular machine I am not sure if there is a trick to removing the caddy or if the machine is...

I'm using Flexi Sign Pro 7.6v2 in my sign business and would like to branch into decal and label making using thermal printing. I don't particularly care to upgrade my software, I see in the list of supported printer drivers the Gerber Edge 1, 2 , and FX. My question is which one or will all of...

I have recently started work at a local sign shop as the production manager. I am familiar with most of the equipment that this shop uses, as it is similar to other shops I have worked at over the years. The one main piece of equipment that i have found that we have all set up and ready to go is...

I have done several searches within the forum on situations having to do with the Gerber FX Edge printer and Gerber Composer software. No necessarily finding good or plentiful information on these topics. Do any of you out there no of another forum or site that deals extensively with this...

Gerber Edge FX - Envision Plotter - Foils Edge FX Thermal Printer in excellent condition ONLY 4 hours and 43 minutes of print time on this machine! Resolution 300, 600 or 1200 dpi on material axis (1200 dpi requires OMEGA 4.0 or later and EDGE FX firmware update) 300 dpi on head...

Been shopping for upgrades to our Gerber equipment for a couple of months now, as we expand our business... Looks like Roland is going to lose another potential sale to HP Latex... I can get the HP 110 or 310 with Graphtec FC8600-130 Plotter for cheaper then Roland will do for the VS-540i...

Just over a year old. Including 12 or more foils. Asking $18,000 for the pair, include USB cables also. PM for more info, located in West Central Indiana.

I'm looking to sell my Gerber Edge FX that is 2 years old and has very low use on it. Has a new print head as of June, 2012. It is still under service contract with Advantage Sign Supply. I can provide pictures upon request. Along with that I have an older Envision 375 Plotter that is still in...

I am trying to create some graphics on the Edge FX and am faced with the demand for a large field of solid color. While this is not my first rodeo, I have only rarely seen any Edge printer do large fields of color without a few minor flaws or little specs of missing color. in some cases, on the...

I am trying to print to an Edge FX using Flexisign Version 8. Designing the job is easy, but getting it printed is impossible. I keep getting the error message "Foil Mismatch". I have checked the "use spot colors" box under the Advanced Tab in the RIP & Print Menu and tried mapping the (one)...