ghost

Hi, In this summer, we have a lot humidity ( 50-60% ) and on certain fabric (polyester look like coton), i have a ghost on the first 5-6 inches. After one pass, i flip for sublimed the other side and now, no ghosting and very sharp transfert (sub). I use Monti 853 calendar. I print on paper...

Hello Everyone, Been trying to solve this by myself by cleaning the head, cleaning the encoder strip. unplugging it. But could not find a strong solution. Is it caused by static? please help Roland VS640 is my machine. https://imgur.com/a/9yu4jf0

I have had problems with this in other versions of Flexi, but I am currently using Flexi 12: Edit/Add: The raster image colors were red and white(hence why I used color trace). The vector was changed to the black shown below. -When I have a raster image and use the color trace function, I...

Client is looking for ghost or stealth or ghost vehicle graphics. Would this be simply black reflective cut graphics or is there an alternative method of producing this. Is there a printable black reflective film if there are layered graphics? Thanks for assistance

Hi! Im completly new in LFP, after preparing a used JV33-260 (new printinghead, new ink), I run into troubles after adjusting the head. Printing with RasterLink is working, but printing in bidirectonal mode causes ghosting - a difference between the two ways about one millimeter. (see...

Well here's a weird one. Recently, I replaced a long overdue head on our JV4 (DX4 aqueous), as we've been hobbling along, printing only with the front bank of heads for far too long. Long story short, with both banks printing now, I'm pretty limited by how I can print because of an...