• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

gs15 plus

  1. Gerber parts

    Anybody know where I can find parts for a gerber gs 15? I need the black plastic cover that goes over the knife. And I also need two screws. Thanks for your help.

  2. Question GS15 plus roller cleaning

    Now that we have the inside of our GS15 plus clean, I am working on the outside of it today. What do you recommend cleaning the rollers with? I don't want to end up with sticky, gummy rollers! THANKS :)

  3. GS15 Plus beeping on start up

    Contacted Gerber tech support yesterday regarding my GS15 plus beeping repeatedly on start up. She determined it was a theta axis error and gave instructions on how to clean the sensor on the motor that rotates the knife. After doing that, the plotter worked great for the rest of the...

  4. Tangential Blade Screws

    Does anybody know what size of screw is used to secure the tangential blades into the carriers for the GS15 plus? I keep stripping out the hex key screws. Looking to find some that use a phillips head and are hardened steel. Open to other solutions and suggestions as well.

  5. GS15 Plus Y-axis jamming

    My 15 year old GS15 Plus began jamming on the straight y-axis a few weeks ago, but was still able to do cuts as long as there was any kind of x-axis movement (curves). It began randomly at about 8-9 inches up and would only do it infrequently, but now it is getting progressively worse across the...
Top