I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
It started off with a few minor pink spots and then it got a bit more and now it basically cover 90% of a print which basically means I cannot print anymore until it is resolved.
The technician replaced the head cables and it still continued so he suggests that it is probably the head that...
Anyone have any extra heads for the 3100? Looking for the heads with blades, the long single, and both double blades.
Thanks in advance.
Centex wraps and signs
Using VW dual to do the job
The printer will print out the job and then go back into the capping station
Then the cutter and the heads will come out to cut the job. It causing a motor error to happen during the job
Has this happen to anyone?
Hey Everybody...
We're trying to find a good resource for replacement heads for a Mimaki JF1631. We'd also need to source the alignment tools as well. Any input would be greatly appreciated.
Thanks
Joe
I have a Roland SP 300 that keeps blowing the F3 fuse when I plug in the servo board. I have installed new heads and have swapped cables to make sure both heads are fine. Any Ideas?
Thanks in advance
Kevin
Hi guys.... I have a 160s 3 print heads,, cmyk lc lm ...... i just put new 3 new heads in and i forgot to mark the order the head cables go in.. please need asap help so i can get it back up and running cant find anything on the net
Hey guys. I'm close to buying a S70670 for 1K. Both heads are damaged and I plan on replacing each, both service stations, along with the ink station component as I've seen everywhere they were slightly defective. I'm handy with printer maintenance/repair and feel capable.
How much do these...
I made the stupid mistake of powering down one of my printers without setting the periodic cleaning to on and then leaving on vacation for a month. Of course when I returned a couple of the heads were blocked. In the process of trying to bring the printer back to life I blew a mainboard fuse...
Pretty sure we need the dampeners, encoder strip and both heads replaced in SP300v .
I know prices vary, just trying to find out rough pricing.
Techs are less then 10 miles away.
Your help is greatly appreciated! Thank you.
Our JV33-130 is now 1 year old (out of warranty), and we received a letter offering an extended warranty through Mimaki. What has been anyone's experience with the life/reliability of the print heads on your machine? Our original JV3-160 has been a work horse with very few head issues in the 9...
Selling a Durst 600 4 colour with white. Roll to Roll option included. fully operational, new operating CPU, new belt, new lamps. Please contact Guy at ask guy.ca for details. Video and stills are available.
https://www.dropbox.com/sh/4iakp25uuicsjp0/AADAn8eAUW2xU3xh8L4956b4a?dl=0
This is a...
Hi, we need an idea what is going wrong with our machine please. Sometimes it will print perfect, other times it will start horizontal banding halfway through a print. We have had a tech come out a few weeks ago and tell us the black print head needs replacing. But we also have a good very...
We recently changed out our 24 UV-SE heads for SM heads. I have about 10 left-over SE that need cleaning or re-furbishing. Anyone recomend someone that can clean/refurb and trade me for some number of SM heads?
Thanks in Advance....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.