• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

help needed

  1. Need Help JFX200-2053 EX vs Anapurna H2500i

    Hello, I am kind of new here. Looking for an advice. We do personalized and we want to add new line of products that will be done with UV printing. Photo printing on acrylic(color+white+color). Small sizes(2x2,4x4 etc.) Photo print on foamboard(8x8, 12x12 etc.)(CMYK) Photo print on thin...
  2. Need Help Help with my JV33

    Hello, I hope you are well. I am writing this post because I have been having issues with my JV33-160 DX5 head for a few days now. This machine had been sitting unused for about 8 years and we decided to repair it in July. We changed the head, the entire capping station, dampers, ink lines...
  3. Need Help Pricing Help

    Hello guys, I'm still pretty new here. I have recently made the jump into starting my own small sign shop after working for over 20 years on other peoples shops on and off. However, in all those years I was only involved in design and manufacturing and never in coming up with pricing. My...
  4. GRAPHTEC FC2250 getting offset gap while cutting

    Hy I own a fc2250 120 during a few days now and i'm facing a problem during the cutting event using 4 cut marks on job with GRAPHTEC STUDIO. The plotter cut the first shapes good but then it take a gap as things progress. The problem as begun with litlle shapes on jobs but now it has grown bad...
  5. Need Help Mimaki CJV 150-75

    Hi everyone, I’m looking for some help with my printer. I purchased a CJV150-75 that has sat for about a year. It will not print,expired ink,not stored properly and I’m sure the head is completely clogged. It shows no errors other then the expired ink. I was hoping someone could give me some...
  6. Need Help Roland XR-640 wont print at all

    Recently bought a roland XR-640 that had been sitting for a few months due to last owner buying the latest model. It was stored in unfavorable conditions being that the carriage was in the center of track and not in capping station. I recently bought all new maintenance parts (wiper, felt...
  7. Font id in font aisle

    Ok, deferring to font gurus. Any chance on ID of this font? Appears to be some individual manipulation of a a few letters. Waded through my big library, and couldn't find this specific font. Thanks as always. Chaos
  8. Help Needed in LA - 2 weeks of full time work

    Need help with a large job in Los Angeles, this would be 2 weeks of installing vinyl, 2nd surface, on glass interior doors. Some form of experience or demonstrated ability to do proper installation preferred!
  9. Need Help HP FB750 Printhead Replacement

    The lm printhead on our HP FB750 printer has shot an error message for several months now, saying that the "printhead warmer is too warm" or "printhead warmer failed." I knew this would eventually lead to total printhead failure, and now since we're at that point.. does anyone have any advice...
  10. Need Help Hello from beautiful balmy Brisbane Australia

    I have joined here following a recommendation from a local decal printer who cannot solve my little dilemma. At this time I am singularly focused on learning how to, or finding someone who can already, recreate a special 1970 French motorcycle decal that involves a 3-color reverse print onto a...
  11. Printing problem SP540 - horizontal line across - Need help

    Hi everyone, i need help with my Roland SP540, since a few days, i got horizontal line across the vinyl when printing (you can have a look on the attached image) and this can appear right after starting or after printing 50 cm, or none, or more and less... test print is really good, encoder...
  12. Need Help Opening the GERBER EDGE 1

    Hy everyone i'm coming here to get feedbacks on the GERBER EDGE 1. We recently got one cheaply with ribbons included and were already using a SUMMA DC4 SX so we are used on themal printer. First of all i don't know if it will work not because it has been sat in a room for about 4 years unused...
  13. Need Help Need online tutor

    Is someone available to teach me print and cut online through Zoom ? I have a Mutoh printer and recently got a Graphtec cutter. I need someone to teach me how to use Registration marks and just the basics on Flexi. My email address is hooshmand.f66@gmail
  14. Need Help Rasterlink 5 white help

    Hi I am new to UV printing and i'm having a hard time printing in white with rasterlink 5. We have just acquired a mimaki 6042 and I am trying to print an image in white but do not know where to start. The image has a lot of different colours but I just want the whole image to be printed in...
  15. Need Help Error 26.06.10 from HP 360 Broken Bag

    Hy everyone, We've just got a used Latex HP 360 printer in the workshop but the printer display a Yellow Broken bag error 26.06.10. We are new with these printers and not having any experience with theses. Any help on this will be welcomed:) François
  16. Need Help Roland xc-540 sheet cut won’t cut help

    We sheet cut button works and it moves the knife but does ingage the blade can anyone help me ?
  17. Need Help Problem with ink No Magenta or Cyan coming at all! Changed Fuse - Roland xc-540

    Hi Guys, Had an old thread however not had much luck with it. I have a xc-540 and I have no magenta or cyan what so ever I believed this to be a issue with the fuse as someone said I could have blown the fuse when I was trying to fix my 'sensor eye error' I have since ordered 3 fuses and...
  18. Gerber Edge and Flexi help needed

    Hi all, I'm new to this forum so would like to say a big hello to everyone. I have bought a Gerber Edge 1 and trying to print chrome on clear, but the print is coming out very blurred. But the problem is if I set it to spot colour and send it to print nothing prints? I'm very confused what to...
  19. NY Need help with my HP 315

    Hi there, I am looking for someone to come and help train me on my new HP 315. I find my customer support package insufficient for the amount of stuff I need to teach myself. You must know and understand the machine, SAI Flexi software, and know how to tile and should be a master on the...
  20. Need Help Vehicle Wraps

    Hello All, Just recently joined with this forum. Am a fairly new yet quickly growing sign business in Houston. I have always been interested in Vehicle Wraps, but am slightly unsure of the process. I would be using 3M IJ-180CV3 for the wrap and then printing on it. My concern is in the...
Top