issue

Last week I had an issue of some of one part of the black and part of the cyan went blocked and wasnt printing correctly. I worked out that the pump wasn't pulling through, so I removed the complete station and cleaned the pump and fitted a new cap. This seemed to cure the issue, until I came in...

Hi I seem to be getting alot of banding in my prints. I've done manual cleanings, cleaned encoder strip, adjusted my bi-directionals, multiple powerful cleanings. Also the tubes were changed around 3 months ago. My machines are pretty old but the print heads should have been changed about a...

been using the HP L25500 for three + years, print lots of wraps, high end graphics. I have never encountered this issue. tried several different ways to create this gradient but no matter what I do i get this blue line at the end of the gradient. started in Photoshop with a layer style, then...

Hi all, first time post, long time fan. So I'm currently using a Summa T160, regular cut jobs are done through Winplot and print/cut jobs are through Cutter Control (using the barcode feature). The printing is done through a HP L26500 with Ergosoft PosterPrint RIP software. I use adobe software...

We are running a HP Z6200, and I"m getting this weird "overspray" on our prints. The prints are just solid color with White type. We are getting these lines going in the direction of the carriage motion. We've turned the file, and the lines stay in the carriage direction. I've updated the...

Hoping someone here has had this issue and it's just a setting that I have missed and not a bug in the software. The issue I'm having is the first 9mm (3/8") of the image is being distorted on my RJ6100 falcon indoor printer. Firstly I thought it was the rip software (production manager 8) or...

We have a Mimaki JV3 -160S. When I do a test print, the first head will not fire. The capping station and lines won't fill with ink. What we have tried: -Replaced the head -Replaced the pump assembly -Replaced the slider board -Switched the cables from head 1 to head 2, they worked on head 2...

So the VS-540 isn't the quietest printer on the planet however it usually is not THIS loud. It may have been gradual but it seems like it very quickly went from a dull zipping noise to a very irritating high-pitched digital buzzing noise as the print head slides back and forth. Has anyone...

Today I went to start up rasterlink pro5 as usual, but the loading screen is stuck on "Checking profile information of JV3-160 SP". Has anyone else ran into this issue?

I just replaced printhead with dampers in Roland VS640, after that every test print showing different pattern of missing dots, if I leave printer for while , test print is perfect, after few lines of print there are missing dots again. I checked every known aspect, changed captop and dampers...

So we have finally gotten past all our problems with our FC8000-160 except we can't figure this one out. We have tried a new blade, got a new cutting strip, tried different setting (messing with overcuts, tangent emulation, force, circle resolution), updated the firmware and cant find a...