• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

jfx200-2513

  1. Need Help JFX200-2053 EX vs Anapurna H2500i

    Hello, I am kind of new here. Looking for an advice. We do personalized and we want to add new line of products that will be done with UV printing. Photo printing on acrylic(color+white+color). Small sizes(2x2,4x4 etc.) Photo print on foamboard(8x8, 12x12 etc.)(CMYK) Photo print on thin...
    • Roman123
    • Thread
    • advice needed agfa anapurna help needed jfx200-2513 mimaki
    • Replies: 0
    • Forum: General Chit-Chat

  2. Need Help JFX 200 Loud Head Movement

    We have a JFX200-2513. Recently the movement of the head started to get very loud. It seems like the head is having trouble or added resistance moving. I am thinking that the slide units on the linear rails are starting to go bad. I see that they have grease zerks on them, but they have a...
    • jbarry14
    • Thread
    • bearing carriage carriage bearing head jfx jfx200 jfx200-2513
    • Replies: 6
    • Forum: Mimaki
  3.

    Need Help JFX200 White Ink Alignment Issues

    I replaced both heads in our JFX200-2513 printer. I have replaced several heads in the past with no issues. After replacing the heads, I filled up the heads and sub tanks. I did an air purge. I went through and did all of the print adjust alignments, 300, 600, 1200. BI, SI, RE. I checked the...
    • jbarry14
    • Thread
    • alignment head alignment jfx jfx200 jfx200-2513 mimaki white ink
    • Replies: 3
    • Forum: Mimaki
  4.

    Need Help JFX200 White Ink Problems

    JFX200-2513. I am having problems with the white ink. It is creating almost like a mist, deflection, or shadows to our prints. I have replaced the white ink filters, put in new white ink. I changed the head gap to 1.5mm, I have done all the digital alignments. Have adjusted the head voltage. We...
    • jbarry14
    • Thread
    • flatbed jfx200-2513 mimaki mimaki head adjust white ink
    • Replies: 34
    • Forum: Mimaki

  5. Need Help JFX200-2513 Starvation of Both Heads? No Errors

    I've searched for similar issues with this printer on Signs101 and have turned up nothing. Double CMYK configuration. After a clean test draw, we begin printing and after several passes on a photo-realistic print (only just a few passes on a solid color such as C or M or Y or K), nozzles start...

  6. JFX200-2513_Ink Scratching

    Hey Everyone, We recently switched from Rasterlink 6 to Onyx 19 for our rip software. I ran into an issue of ink being really fragile while running steal blanks on the flatbed. We've run these hundreds of times on Rasterlink with no issue. The problem is, I reverted back to Rasterlink to try...

  7. Need Help JFX200-2513 SYSTEM HALT (6) 637:INK LEAK :00001

    Hi all, I am receiving below message and my printer's stop working. Any idea? SYSTEM HALT (6) 637:INK LEAK :00001

  8. Need Help JFX200-2513 Ink Heater Thermistor issues

    We've had our JFX200 up & running for well over a year and are experiencing two issues. The first is error 715 (ink heater thermistor), it comes up daily and requires a shut down and restart. We've had the service tech attempt multiple repairs and it's still an issue. They (service) are now...

  9. Need Help Mimaki JFX200-2513 Repair Tech Recommendations

    Hi, Can anyone recommend an independent Mimaki repair tech that can work on a JFX200-2513 in the Seattle / Tacoma area? Thanks

  10. JFX200-2513 clear ink issues

    I was wondering how many people are using clear ink in their JFX200. We have had repeated issues keeping nozzles in our clear head. The best we have done is 90 days before we drop more nozzles than can be mapped. We have had over 6 heads replaced in our machine and it is only 2 years old. I...
Top