• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

jv3

  1.

    JV3 heater wiring - voltage

    Doing some routine maintenance, I reinstalled some hardware on the JV3 after cleaning around the heads, and my hand every so lightly bumped up against the wiring for the voltage selector, located on the underside of the machine, at the far left side. These are the selectors that allow you to...

  2. JV3 color fall off The purple monster is making me want to ripp my hair out!

    Someone help me please. I start a job. For about the first 12-14"s the printer prints the correct color, after that the color shifts and the tones are all over the place. Blacks and dark grey become red or brownish. I make device skins. I am super new to this (5 months), brick and mortar...
  3.

    jv3 help please

    Can any one please Diagnose this problem by looking at this picture. Jv3 was working fine and then it just Stated to print out of alignment Offsite pics replaced. Please read our rules and instructions on photo posting.:frustrated:

  4. Disable jv3 chip

    Hi, do you know how to disable chip on mimaki jv3??

  5. JV3 160sp Head Install

    Recently, I posted a question about the light Magenta/Light Cyan Head on a machine that I just purchased used. Come to find out, I needed a new head. I have the head installed, but before I did any sort of alignment I did a test draw. It looks like the light magenta and light cyan are...

  6. Rearranging cartridge placement?

    Printer: JV3-250SP RIP: PhotoPrintDX - Production Manager (Flexi based) Hi all, Every now and then, in an attempt to improve our output, I dabble in head-aligning and creating profiles with bi-directional printing in mind. I'm never impressed with the result though, as chromatic banding is...

  7. NEW PRINTHEAD Mimaki jv3 160s

    I need a new printhead for a mimaki jv3160s can anyone tell me the best place to get one or if they have one that is in GREAT working order that they want to sell i am a VERY small business just starting up and need some HELP

  8. JV3 160sp Banding gets worse as carriage goes left

    Hello, We have been having a problem for a few months now. We are getting a faded banding that gets worse as the carrige goes away from the starting point. It is happening in uni and bidirectional printing, fast and normal, 8 pass 4 pass. We have adjusted the room temp and humidity,changed...

  9. Cyan prints where it shouldn't

    Our JV3-160s has been very dependable. Today it has me stumped. I am using a Wastach rip, while producing a 59" wide print, on the far side of the ink wells the cyan is printing where it shouldn't. It is not head strikes or file issues. It actually prints random bands but only on the far side...
Top