lightbox

I have a light box on the side of a building. There is a main box about 4 inches deep, then another small one inch frame in front of that box. I've never had to remove an insert, and I don't really see how to get the frame off. Any help would be appreciated.

I've got a client looking to add a drive-thru to their existing restaurant. For those with experience building drive-thru menus, do you recommend using a standard EX lightbox on a post or do you usually have something custom made? My current plan is a standard EX box, with some internal support...

We replaced 4 large acrylic signs 2) 4'x8' and 2) 5'x10' 3'16" acrylic panels printed on Avery translucent vinyl on an HP360 with the rip settings to max ink density (supposed to be comparable to double striking). We also had an electrician retrofit the box with LEDs. All 4 of these are...

I have a customer that needs a new panel put in their lightbox. They can't tell me if it was clear or white before. So my question is since I don't do a lot of these, if I buy a new piece for their box is it best to get the white panels that allow light to come through so it is diffused, or...

hey all, we started making our own lightboxes using aluvision aluminum and gaskets we solvent print onto Samba FR fabric. my problem is that when we sew the gasket strips on we have to be very accurate since the samba has little to no stretch to it. Does anyone know of a nice fabric that is...

Double sided light box 4'x8' in area prone to tropical storms, hurricanes, tornados and blizzards. High Impact Polystyrene or Acrylic or Polycarbonate Suggestions and feedback greatly appreciated. Thanks

We recently received permission from the municipality to build these lightboxes under a highway, its right on the main intersection of the city, we used this montage to show what the project would look like. My questions is: how would go about manufacturing these curved lightboxes? Our...

Hi All, Just thought I'd join your little community here. Looks nice.