main board

My board went out and I ordered a new one. Would someone send me their parameters so I can put them on my new board? Also. Any help would be appreciated. I am a diy owner. Info,procedure, anything would be appreciated. Thanks Chris

Hi, does anyone have a working main board for a vp-540 Roland printer. Or info where can i found one. Thanks a million

Hey guys i have a little trouble trying to log in MSA to change the main board Already got the new board ready. Here is my printer info and what I got Printer Model = VJ-1624 Mainboard Firmware = 3.04 Controller Firmware = 1.24 Downloaded MSM 8.03 Downloaded MSA 4.1.7.0 From This...

Our 7151 recently started acting up and is now basically unresponsive when any button is pressed. I came into work on Monday and the screen displayed the "power off; press enter key" menu. Seemed frozen but began to work briefly. I was able to print 3 runs. On the 4th, the printer stopped...

I picked up a cheap Roland SC-540 that is not working at all and I'd like to see if I can coax any life from it before I consider it scrap. I do have the service manual that was posted in a thread by a member here and that was a great help to this point. Current condition, Service call 0002...

Hello! I'm new to the forum, although I have found very useful information in the past just looking at other's issues. So first off, I want to thank you all for sharing your knowledge and insight! Like a few other SP540V users, I too have blown the F2 Fuse that controls the Black/Cyan Print...

Hello everyone and happy 4th! I just replaced all four dampers in my 1624x as well as my maintenance station. When I go to turn the machine on it acts like it’s going to fire up but as soon as it reaches the “version 3.0” screen it shuts down completely. Does anyone know what is causing this to...

Hi I’m trying to find out if it’s the main board causing a power loss when sending job to printer because it turns on, does cleanings, even prints reports and does test prints to check nozzles but when I send a job from VersaWorks to the printer it just shuts off as soon as it goes from rip to...

Hi Guys I am vinyl sign maker. Recently I acquired a Mutoh VJ-1614 (It is actually re-branded as an Oce CS9160 but is the same printer) It has an Error "E085Err Heat Head" From my research it seems to be cause by a faulty CR board or main board. Problem is I can not find these parts anywhere, I...

A couple weeks ago our VP540 wouldn't turn on or respond after sitting over a weekend. We ran through all sorts of troubleshooting with a tech who said he was sorry to inform us that it seemed like the main board was the problem. He sent an email with the cost of a new Roland board but told us...

Does anyone know of any online,reputable suppliers of Main Boards for Roland xc-540 proIII. Has anyone ever repaired a main board,or have any tips or other bits of info on Main boards. I have 2 that have been replaced and I am thinking about repairing them if possible.

Has anyone installed a new main board on a Roland Cj-500? Like to know how difficult of a job that is? I bought a new main board and was told I have to extract all the info I have on the old board and transferred it over to the new board. I can't find any documentation of how that could be...