mainboard

Hello, I was wondering if anyone had any information on were to get the small individual components that are on the main board. I am going to buy a new one but am really interested in if it is at all possible to replace some of the small pieces and have a back up for emergencies. This is mostly...

Hello, I havea problem. I saved parameters from old main board After install new main board i see clear display. Can you help me this problem? I need transfer old parameters to new main board Please help!!! Best, Mike

Hi! I need to know what means the led on the main board pcb, because my mainboard led is red right now and I remember that led was green... any ideas? Thank you!

Hello guys, thanks for all the tips and advice in advance. Here is the situation. My mutoh 1638WX had an ink leakege from the spitting box going down all the way to the mainboard with only 3 months of use. We are using J-teck Italian inks for sublimation. The problem here is that we've called...

Hi, I have a mainboard from Mutoh 1638W with a non-working ethernet port. Does anyone know if there is a company or some technician that could repair #broken mainboards?

Hi, any one know where can I find a working Roland FJ-50 mainboard? Thanks

Can anyone pls help me with the Peck4 tool for a Roland VP 540 printer, where i have to change the mainboard. Kind regards and Thanks for for your help Jakob

After being scammed by MACMEDIA, who stole 4 mainboards from me, i have been forced to buy a new VP 540 mainboard for my printer. We bought a brand new RS 540 board from our local Roland dealer and installed the board with all cables etc. In The service manual it says pres left,up and down key...

Hey Guys I have seen some negative feedback about this guy a few years old here on signs. I would like to know if the situation has changed?? I sent him 4 mainboards for my printers last week, and havent heard a whistle from him since, sent him a number of emails, but no response, i have now...

Hello everyone, need help with a strange issue I can't seem to diagnose. I have a Roland SP-300v Versacamm. Our blue and black print head stopped working so we did diagnostics. After many tests of continuity on ribbons and syringing for clogs, we finally figured out it was a motherboard...

Hi everybody Can someone give me the way to initiate a new cjv30-100 main board. the farmer is dead. I just replace it today but i don't have the old data.. The printer start as a cjv30-60 in spanich... I have firmware update tool- I think i need values for/from a cjv30-100 ss21 printer...

Hi All, I have 2 mimaki JV3 160sp printers and both have gone down twice in the past year. Last time they went down about 20 minutes apart. Each had several pieces replaced (IO Board, Mainboard, Sliderboard, various cables). This time they have gone down a few weeks apart. The symptoms are the...

I need a cpl. of inductors for my Roland Cj-500 main board,, I have not idea where to buy them or even what to look for since there are not much markings on it,, other then 181 on top and 125°c mark on the side. One located on L1 the other on L2 board markings. Enclosed is a picture of it.. if...

Hello All, I am a newbie to this forum, so hopefully someone can help me... I am willing to take photos etc, if this helps... Cut a long story short, I powered up my machine, and during bootup, just after initialization (like 5 seconds after pressing power button) I get a beep... and on screen...