mimaki jv33

Hey guys I have finally narrowed my issue down to lack of vaccum. I just changed to a brand new printhead which I thought was my issue, but still got not ink through the head after installation. I changed the cap again when I put the new printhead in and after several cleanings and ink fills...

I have a jv33 160 been running great for four years. Suddenly last week both yellows went out completely mid print. I changed the cap and got everything working again. Then within a few days I lost both yellows again mid print…and now one side of the magenta. I will list what I’ve done so far...

Recently estimated that 90% of Mimaki users prefer SS21 inks over other ink types. And it's no wonder why - Mimaki’s SS21 solvent ink is available in up to 10 colours, is quick drying, offers excellent weatherability and rub-fastness and provides super-high picture quality without a granular...

Hey guys, I have successfully used Mimaki JV33 by using a non OEM head, but I can't use the Sb54 or 51 ink chip, are there any friends who can provide solutions,

Hi Everyone, Does anyone have the specs to create your own profile for RsterLink6Plus, to use with: SS21 CMYK specs for: General Formulations #235, 3.4 Mil Matte White, Non Top Coated...? The last color profile for the Mimaki SS21 CMYK inks that I downloaded from the GF site was created in...

I'll keep it short and sweet - would any Mimaki JV-33 or JV-5 users out there happen to have an extra bulk cartridge of ink I could buy from you? Triangle JVV Eco Solvent, 2 liter, Magenta. Having never been notified of this change by our supplier (because we only buy very little ink), we just...

Please can you help We have a mimaki jv33-160 solvent printer. Has been running really well but recently realised when ink is running low or is empty does not detect this. We have to changeover ink when it is at 2 percent So in the long run a lot of ink wastage Secondly our test draw is...

Add a new model printer to flexisign So I am trying to get a Mimaki JV33 to print from my Flexi 8.1 software but that model is not in the dropdown box... any way to get the JV33 in the dropdown box?

Looking forward to your replies on this issue please When we power on our mimaki all works well as normal. When starting to load media we get linear encoder error 08. When powering off and back on solves this issue. While printing the first head move creates a current issue where the head...

Hello Everyone I am new to sign making industry with plenty of experience in graphic design. I have purchased used Mimaki JV33 and Graphic FC8000. For printing I am using Rasterlink software and for cutting "Cutting Master3". After putting registration marks with cutting master3, I print the...

During printing the display shows the error 121, at another time the error 120. In the meantime the dregs impression after I pause printing and release again (remote) normalizes. I'm completely sure that my external environment is between 20 and 30 degrees. Could someone please help me? It...

Hi, I am asking any Mimaki JV 33 user if they have a copy of the Mimaki JV 33 Bible, it was posted some years back. If so and are willing to share I would very much like to have a copy. Thanks in advance Royce

Looking for someone to create some 6-color profiles. We cannot find any 6 color only 4 color. We have 2-JV33 printers both running Flexi and one prints fine with no profile and no color correction and the printer we need to print these orders is having problems using the exact same settings...

Hello to everybody! Plotter Mimaki JV33-160 stops printing at the beginning of the print and gives an error (MTR.ALM Y: CNT.OVER), manual say to power off and on the printer, it doesn't help. Searching in the web in few forums i find to post that says that i need to change axis-y motor. I can...

Greetings, I have a problem with my Mimaki JV33 .. 1 week ago thieves broke into my store and stole some air conditioning and moved the cable-I had my protector UPS to protect the machine, in the morning when I get to my shop, try turning the Mimaki and tried to turn but did not, just stay the...

Every single time I manually clean the printer head with the appropriate cleaning solution and cotton swabs, a subsequent test print yields large chunks of each color missing. The issue was (supposedly) a capping station/suction-related one, however the trick I used to rectify it is no longer...

Hello, I have mimaki jv33 it's 5 yrs. old now im having an issue on one magenta head in middle of printing it don't shoot half of my left meganta if I do a fill up ink and cleaning it comes back sometimes for long and sometimes right back half the others are always good. My question is if a new...

Hi, We have just replace the head on our Mimaki JV33, all done no problem, printing crystal clear. We primarily print safety signs, so lots of block colours, Red, Blue, Black and Yellow etc. printed fine for the day, following day when printing Red signs, black bands start printing in the...

Hello. Two days after my Mimaki JV33-160 printer was installed, my computer crashed and unfortunately I did not have a recent backup with all the Rasterlink software, drivers and profiles installed so I ended up reinstalling everything myself. I have everything working again but now when I open...

I have a JV-33 160 3 years now and yesterday i saw on the display in that under the POST HEATER indicates "BREAK". Of course the post heater doesn't work. Do you knpw something about it? :help