mutoh 1614

Hello, I recently acquired a Mutoh 1614 that has a bulk system installed, I've been having trouble getting it to read the ink smart cards received with 3rd party ink (Jetbest) They've repeatedly sent out replacement cards as well as the original set, but they either come up as ink end...

Need a Mutoh Tech in the Brownsville/Mcallen Texas Area to service a Mutoh Valuejet 1614 ASAP. Need to install new printhead, data cable, flush lines, and check-up. Please contact Albert at 956-294-2510

Hello, I'm having issues with a nozzle, on the nozzle check I get a lot of interrupted lines, and while printing posters the colours are of course all messed up because the magenta isn't flowing properly. Also, while printing - I notice there are a lot of horizontal lines on whatever area...

Hello Everyone, I have a Mutoh 1614, I was printing on arlon 13oz banner, use flexi rip, optimized my profile and the customer is happy. However I noticed green seems to fade or shift color from one end to the other. Can anyone help me identify if this is a ink starv, dirty encoder strip, or...

hi, we bought mutoh VJ 1614 secondhand. all it's ok in FLEXI 10 (it's printing!) with onyx, when we hit PRINT NOW, the printer displays: CONVERTING and doesn't print anything. just stays with this message. what it's the problem? thank you

Hi Guys I am vinyl sign maker. Recently I acquired a Mutoh VJ-1614 (It is actually re-branded as an Oce CS9160 but is the same printer) It has an Error "E085Err Heat Head" From my research it seems to be cause by a faulty CR board or main board. Problem is I can not find these parts anywhere, I...

Hi, we have a problem with yellow color. start to print and about 5 cm lost yellow. i replaced dampers, printhead, i checked color tube and ink flow but nothing. now i am thinking at transistor on the main board. is it possible? i am going crazy.

Hello everybody,i was wondering if anyone else have this problem with RipCenter Onyx If im tryin' to print the top speed 18m2/h my picture is not centerd and scaled corectly How can i print in banner 4 mode,4 passes bi...its a shame i waste to much time on banners MUTOH 1614 USER

Went to turn on my printer and it came up with an error code of E079err commu. Talked with mutoh tech, said it was most likely a lighting strike. I started digging into the printer and found out we had a mouse problem. Took off the front heat plate and found chewed wires and parts on the heater...

Hey Guys, I'm buying a new printer and I have to decied between these 2: Mutoh value jet 1614 with flexi Roland VS640. Which one would you go with? I print general signs, banners, carwraps. Which is friendlier? Colorwise wich one is better? Suppliers? profiles? Thanks a lot!

Hey Guys, I'm buying a new printer and I have to decied between these 2: Mutoh value jet 1614 with flexi Roland VS640. Which one would you go with? I print general signs, banners, carwraps. Which is friendlier? Colorwise wich one is better? Suppliers? profiles? Thanks a lot!

I have been using Windows XP to run Wasatch SoftRip 6.7 with my Mutoh 1614 64" printer but have recently upgraded computers to one Windows 7. All drivers have been installed, printer pinged, etc. Called Wasatch and Fellers tech support and spent hours on the phone with these guys (all are quite...