panel

I plan to do a trailer wrap and I will be designing the graphics in Photoshop. I don't plan to do many (any) more wraps so I have not invested in rip software and I am looking to see if anyone is available that I may sub out the rip work to for a fee. I will likely be using 365 to have the...

I have a customer that needs a new panel put in their lightbox. They can't tell me if it was clear or white before. So my question is since I don't do a lot of these, if I buy a new piece for their box is it best to get the white panels that allow light to come through so it is diffused, or...

I need help with a current project I'm working on. My customer wants his sign to be 10' wide x 6' high. I reached out to Harbor and the widest they go is 5' wide. Does anybody have any suggestions on who I could use to get a panel that big? I have the option of using Foamcraft but to keep costs...

We are selling our Saw Trax compact. We purchased the unit around 10 years ago, at the time of purchase we did some sign work that required panel cutting. Over the last 6 or 7 years we have barely used the unit. It is in good condition.

When i was using flexi i could scare from the rip. I us some of the bad wrap templates and they are scalled at 720dpi. I could then select it and scale up by 1000%. In onyx i do not see an option to do this. Also in Flexi i could select different panels i wanted to print and not print the...

Hello all. This damn printer... I'm about to light it on fire. Last spring when I was printing my first wrap on it, it would shut down about 15-18' in to a 20-25' job (full width). The first panel would print fine, but the second one would fail. This happened while it was still under...

We print several rolls of phototex per month. We just did an install and I have one panel that have one 1/2in crease on the edge of a seam and like a 1/4in bubble on the bottom part of the panel. It wasn't there when I've applied the panel. I can sqeegee it down flat, but it still cumming up...

Anyone recognize this? - Locked tight to the wall, I'm sure we need to have a tool to get behind it.

I've owned this printer for 5 years and have had nothing but problems printing gray. Anyone have an solutions? Iv'e tried different profiles, all my grays either come out purple or green or just inconsistent from panel to panel.

I have a customer (friend) who just got a used portable trade show booth. It is about 10.5' long, and 7.5' high. There are vertical magnetic strips that the sign panels (booth wall) attach to the skeleton or structure of the booth. There are 4 panels 26.5" wide by 88.125" high. They look like...

I have a friend I am trying to help who only does a few jobs a year so he doesn't want to buy all new equipment - especially since all the old equipment still works (with a tiny exception). He has Windows XP, uses Omega 2.6.1 to run an old Edge and GS15 plotter and a Roland GX-24 plotter. He...

I'm having trouble finding a replacement for an existing Post & Panel System sign. It was injured by a backhoe during snow removal. The attached photo shows a Fiberglass body with an Aluminum Sheet Panel. (inset is just a close-up) Also not the Rounded Ends. The other bizarre thing is ROUND...

Hi All, I have a practically new GCC Expert 24 that has ALL the panel lights on. The error light is solid, not blinking. I use Cadworx Live and Vector Cut. When I send it to Vector Cut it works fine...it cuts perfectly, but the lights won't go off. Any suggestions or ideas what it could be...

Carved Sign Post & Panel, reshrowded pole and new carved panel for post.

Carved Sign Post & Panel

Carved Sign for Post and Panel. Flag mounted post and panel sign.