• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

plotter problems

  1. SUMMA T160 print/ cut jobs cutting paths twice

    Hi all, first time post, long time fan. So I'm currently using a Summa T160, regular cut jobs are done through Winplot and print/cut jobs are through Cutter Control (using the barcode feature). The printing is done through a HP L26500 with Ergosoft PosterPrint RIP software. I use adobe software...
  2. Looking for help with a Graphtec FC7000 cutter, (solenoid) seems to be bad?

    Hello, We have a Graphtec FC7000 that is suddenly acting strangely. The head that holds the cutting blade is moving up and down on its own accord. I called Graphtec Tech Support and they said this machine is not longer supported. The tech suggested that from the sounds of it my solenoid in...
  3. Graphtec FC7000 PROBLEM!

    Okay, we use wasatch to print to my Epson and cut to my Graphtec FC7000. We were cutting fine yesterday afternoon but when I got here today the Graphtec is cutting off about an inch to inch and a half to the left. Called Graphtec and they couldn't give me an answer they also said it was not the...
  4. Mutoh Kona 1400 cut problems...

    I was curious if anyone has similar issues and/or a solution to my problem at hand: What we call a "kiss-cut" is a cut of the material, and not the liner. I do lots of these daily. My problem is when cutting a rectangle, the blade "skips" across the material but only in one direction. So...
  5. EnVision 375 (Comm problem) Cable?

    Hi, I am new to the sign biz and purchased a Gerber Edge 2 and an EnVision 375 from an auction. It did not come with cables but i determined that I needed to get a 25-9 pin com cable. I purchased one from eBay but it seems that the CQMgr does not like it. It keeps telling me it has a comm issue...
Top