repair

Looking for someone to service an Agfa Anapurna M4F printer. If you are interested please reply to this thread. Has two problems: 1) System Error E-1 Servo Encoder, Carriage does not move at all 2) Magenta printhead does not seem to have power (no LEDs lit up). Trying to start up...

Hello, I have had some issues with my HP FB750 printer for some time. I have tried manually calibrating the printer or doing the automatic calibrations and cannot get better results. After talking with HP support, they recommend that I replace the printheads. The repair cost for the labor seems...

Well I got a new (to me) Roland LEJ-640FT. It's several years old and currently "not working". This is my first post here, but I've been browsing for a little while. My goal is to get this printer up and running and post here along the way all the troubles I run into and solutions I find...

Does anyone know where/ how to find a Roland VS-540 Repair technician in or around Tampa, Florida?

Hello, So I have a sg2 640. I was very happy with it in the beginning, but then it started leaking ink on the media holders. I got it repaired 3x and it keeps leaking I'm sick of it. I also feel like my dealer doesn't know anything about te machine, they installed it wrong when I got it...

Hello, This is my first post here! Thanks to everyone for all the helpful information I've found. Ghosting I recently did a head replacement on a VP-540 (it was the black head), and after the replacement, there was some 'ghosting' (that's the only word I can think of that makes sense). I'll...

See picture attached. I'm getting this error (See image): Printer was doing fine, but then stopped, tubes as changed not long ago. A techie says it's a new Line Sensor (fairly easy replacement he says). What say you guys, is he right? Please help, we cannot afford a large scale repair :(

Hi. I'm new to this forum and wished I had discovered you all years ago. I just had a repair tech replace my Epson 7890 main board. I thought all was fine but when I tried to switch the black ink the printer went into an endless loop and never completed the task. I had to force the printer off...

I have a customer looking to repair a fairly old awning that has ripped on the top. I am fairly new to awnings and I’m not sure if this is something over my head, or something really simple. I was thinking of taking it down, and sewing in a long patch of new material across it and sewing it...

Hello, I was wondering if anyone had any information on were to get the small individual components that are on the main board. I am going to buy a new one but am really interested in if it is at all possible to replace some of the small pieces and have a back up for emergencies. This is mostly...

Hey everyone, I have been troubleshooting, repairing, and replacing parts on our SP300V for about 2 weeks and I'm to a point where I'm stuck. 1. Originally our black (K) stopped printing completely, and I noticed that the manifold for the print head had somehow snapped so ink suction wasn't...

We will be replacing the upper nip roller on out AGL. We were planning to do this in house. Have any of you had experiencing replacing a roller/have tips/tricks to make the removal and install easier?

Looking for a service agent in the Modesto, Ca area. Does anyone know of any and recommend?

New help, put too much heat on pan faces while removing vinyl lettering. Faces now have big knots and waves. Is there a way to fix this without spending $1400.00 on new faces?

So it looks like this guy is suggesting to flip the gasket inside of a DX5 printhead in order to get more life out of it. But as you can see in the image, this leaves a portion of the.... ink wells (?)... exposed. Also I don't understand how the head would still have suction from the pump...

Hi, Can anyone recommend an independent Mimaki repair tech that can work on a JFX200-2513 in the Seattle / Tacoma area? Thanks

I really hope someone has some insight. Had the VP-540 for years now and it's mostly printed without issue. Attempted to change out the Black print head (had a major collision with a media clamp) and that's when the problems started. Immediately after installing the head and following all...

Hello, Anyone on here know of a good Mutoh tech in the Houston/ south texas area, I am in need of a print head replacement, and it is something that i am not willing to do. I have had several issues with this printer and I have expended all possible options. I have replaced the pump assembly...

The company I work for has 2 HP Designjet 8000s's. One of them has recently started making a very loud noise that sounds like something in the lower pump housing in the gears are not aligned correctly and they are slipping or grinding. From what I can tell it's the gear that drives the shaft...

Hi, I have a mainboard from Mutoh 1638W with a non-working ethernet port. Does anyone know if there is a company or some technician that could repair #broken mainboards?