• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

rockhopper

  1. Rockhopper / Falcon outdoor spare part name?

    Hi, I have this old but reliable Mutoh Rockhopper and I would like to find some spare parts for it. I´ve changed quite a few durin years and now is the time to replace those (I don´t know the real name, please help) little felts that are under the printheads while printer is not printing. You...
  2. Rockhopper III E118 Head Overheat 3

    Hello, After trying to change a head in my Rockhopper I have the following error: E118 Head Overheat 3. I checked the error codes and saw that it has to do with the head cable. I changed the cable with a new one but again the same error. Any advice on this one???
  3. Pitfire Mobo In Falcon 2 Outdoor

    Hi guys Is it possible to change the (defective) mobo from My Falcon 2 64" with a Spitfire mobo 64"? In My Falcon, when rip while print, Printer is only Taking Data very very Slow via Ethernet. (Checking via task Manager in windows, Printer is the only device on the Switch - Same Thing Using...
  4. Running Mutoh Falcon II With One Color Per Head

    Hi. I want to run my Mutoh Falcon II with one color per head so that I don't get any cross contamination. At the moment the ink order goes KMCYKMCY but I want it to go KKMMCCYY. I have seen this done on other machines so I know it's possible. I cannot find the option in any of the menus or...
  5. Mother board fromFalcon/Rockhopper 46 into a 62. Wont see paper end.HELP

    Hi all. Long time listener and first time caller. I have a 62 Mutoh Rockhopper/Falcon that has been giving me errant head firings. They show as vertical lines the width of the head in all colors from both heads. Sometimes there is 1 or 2 in a poster and sometimes there are hundreds. It occurs...
  6. Mutoh Rockhopper I for Motocross, MX Graphics

    Hi, I have found this printer (Mutoh Rockhopper I) for 2.5k of second hand and I'm thinking of buying it to make graphics for motocross bikes,.. What do you think about this printer, it has good quality? is good printer for this? Thanks
  7. Need help with Flexi 8.6 Profiles

    I have a Mutoh Rockhopper/Outdoor Falcon and I run Flexi 8.6. Is there anybody in or around Charlotte, NC that I could pay to make a few profiles for me? Thanks. Kirk Bauguess, 704-905-3406
  8. In need of Media Scroll Bar, cant find anywhere!

    I acquired a PrismJet Extra (Rockhopper I - 46) and I need a media bar with flanges and take-up bar. I thought it would be easier to find a fair price maybe even on a used one since there has to be several of these things laying around... I know the printers originally came with 2. Also...
  9. Guide Of Code Errors

    Help! I need a manual or guide of error codes for Mutoh Falcon II Outdoor?
  10. Error e105 Fuse 4 Rockhopper II

    hi everyone my printer recently commented Mutoh Rockhopper II was working perfect, turn off at night and everything right the next day when turned on me a few moments e105 fuse 4 indicates an error, apparently, and I read quite all day this error is very similar to this post...
  11. Mutoh Rockhopper II Special Code

    Do you know the Special Code for the Rockhopper II Rh 3,00? Tried the 0393 but it did not work for me.
  12. Mutoh Rockhopper Bi-Directional Alignment

    Hey guys, Wondering if you could help in this matter. I have a 87" Rockhopper 2K Plus (also called Toucan LT) which prints fine in uni-directional, however I can not get it going in bi-directional. I have attached pics of the alignment chart, which NORMALLY (according to the manual) should...
  13. Fuse 1 Error "e102" on Mutoh Rockhopper 2 - please help

    Hello All, I am a newbie to this forum, so hopefully someone can help me... I am willing to take photos etc, if this helps... Cut a long story short, I powered up my machine, and during bootup, just after initialization (like 5 seconds after pressing power button) I get a beep... and on screen...
  14. Color stops on Rockhopper

    Hi I'm new in the sign printing business, and also on the forum. I hope to find help here and maybe to help somebody. I have Rockhopper 62" and some strange problem with it. Have a project to print out several bigger signs (60" x 70"). It starts well with printing a sign, but after maybe 40%...
Top