roland 545

Hoping someone can help me out. I'm running colargate PS7 with my Roland SC-545 printer. All of a sudden I can't seem to print files, there seems to be a connection issue. When I send a file to print it stays printing at 0% and the busy light on my Roland doesn't flash like usual when...

Hey guys. I printed some signs last week and noticed there was magenta ink down the side of the printed vinyl which wasn't meant to be there. I then done a test print and the magenta and cyan is barely showing up on the print. I'll add some pictures to show. I tried cleaning group a print...

Please if anyone can help me, im trying to print and cut using this machine with versaworks. After printing went back and start doing the cutting, but the blade is not touching the material. I already change the flex cable. any suggestions?

Hello folks!! Kind quiet today and I had this idea..wrap the file cabinet and get a better look for my shop...Pleas leave your message and let me know what you guys think! see ya Material used: Oracal 3651 / lamination 210g

Hello, Yesterday I replaced 12 dampers on my Roland SC-545EX for the first time by myself. I took the time and did everything very clean and carefully. When I was ready I did a test print and many of the LightCyan nozzles didn't print. I did a cleaning on the C group and got some nozzles back...

We have had a multitude of problems since we switched to a third party ink. We have used 20/20 ink which I heard was made by Nazdar. Well anyway the test print from the SC-540 is good no missing sections, then we go and print an few graphics and do a test print and there are sections missing. I...

Ok. Here's what I have accomplished so far: 1. replaced pumps (did the bit change and everything) 2. replaced all of the dampers. 3. did a pump up ink, then filled ink. when filling the ink, nothing was being pulled from the ink cartridges. the tubes are filled with air, no ink (except a...