• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

set

  1. Need Help Roland VG2 - How to set up to print/lam/cut

    Just installed my new VG2-540 yesterday. On my old SP-540v, after laminating, I would put it back through the machine, set VW to cut only and it would look for the registration marks to align before cutting. The new VG2- I printed with the alignment crop marks, laminated, put back through the...
  2. Suggestions Contour cut problem in vesa works

    using Flexi and Versa works. Sometimes my contour cut is doing multi cuts on one print. cut pass is set to 1 and I only have one cut line but it will make 6 to 7 cut passes.
  3. Jeti 1224 High pump count.

    I have a 1224 and noticed my pump request/count for one black set is like 700 when the other inks including the other black set are around 30-40..performance is down in that pair too. What should I check? THANKS! Also did an ink clean out and swap out about 6 months ago with new filters...
  4. Vehicle templates

    I once had the ProVehicles cd set years ago. 3 large ring bound books with many cds. Don't still have it but thinking of purchasing a set or a single template that I need currently. Any suggestions. I looked this morning and it doesn't look like ProVehicles offers a single vehicle template. Only...
  5. Versaworks not seeing CutContour

    I recently moved shops and changed some computers around. I installed Versaworks today on two different machines for two different printers. Machine 1 works fine. Machine 2 will not see my cutlines, even though machine 1 sees them from the exact same exported file. I triple checked all the...
  6. font has me stumped

    I have never seen this font before and yet 2 different jobs and they both use this font so it must be available. Attached is the perfect set of letters I traced yesterday and I have another order using this so I would like to know what it is
  7. Is there a way to set Base Point to stay for all jobs

    I have been successful at solving my print/cut issues by setting a Base point further in on my media than default. Is there a way to keep a base point on the VG540 without having to set it manually before each job?
  8. ways to evaluate profile accuracy?

    Apart from looking at soft proofs with the granger rainbow and other images, and also printing them off and comparing them to your monitor. Is there a way you can print a set of patches, measure them and put them against a reference set and see how accurate they are? I suppose similar to when...
  9. Print stopped. Rip software is closed. No error messages. Damn Win update!

    I do not leave my printer print by itself but sometimes I gotta print so much I have no other choice. For this I have a camera set up looking at the printer. I can log in to my computer and see what's going on. Well, this is the 2nd or 3rd time that the printer stops. No head strike. The pc...
  10. Fb500 full auto calibration

    Having trouble with full auto set probably because the camera won't calibrate and focus very well. Any body else have problems with full auto set?
  11. T160 Problem

    We've had this cutter for a few months now and once set up has been great. Just lately we've had an issue where we set the pressure correctly then part way into the job it will increase the knife pressure so much it ruins the job. Like it would cut through the backing if we didn't have the...
Top