size

I swear if I could go back two years I would scream at my boss not to buy the HP Latex 560. *sigh* Okay. So, we've had this printer for over 2 years now and we are just running into a new issue and I need you guys' expertise before I go postal. We have not had any issues to date with the...

Has anyone ever had a problem with sizes being off in Flexi 19? It seems to just do it randomly, I'll print say 20-30 meters fine then it will start printing jobs over size, then I have to restart the program or computer to be safe. It only seems to be in the vertical direction. I've never had...

Hey guys I could really use one help right now. I have done HDU signs before, I’m having some serious issues with paint blistering when removing paint mask l. I am in the process of finishing 2 6’x8’ signs. In the center of the signs there is a large crest that Im attempting to gold leaf but...

Every time I load a roll, my Onyx RIP synchronizes with the printer with the correct media type, but NOT the size. I loaded a 54" roll, and it says it is a 56" roll. Any ideas why it's doing this?

I need to purchase pinch rollers for an SP-300 but I see many different sizes and they are all very close in size but my question is what is the correct size that printer. When I look online the are all a few millimeters different in size. Thanks for your help. Jim

Just wandering if manufacturers should make lamination rolls the same size as the print vinyl (As they do right now, .25" smaller or a .5" smaller? Stuff happens, your printed vinyl wound uneven and it will weave, you did not align it right with a lamination when laminating, or whatever the...

SOLD

Hello all! I have a customer who wants a 4'x12' stretched canvas. I have done "normal" size canvas before but I have a few question about this one. Usually I use 1"x2" lumber for normal size frames but i wonder if i should use 1x3, 2x3 or 2x2 lumber for this size? i like the rounded edges. I...

Have a HP L26500 using Flexi 10 Firmware updated several months ago to 12, since then cannot read poll size from printer and the job prints short vertically anywhere from 1/2in to as much as 3''. HP tells me I have RIP and print problem SAi says I have a printer problem. Adjust size in the...

Hey all, I've had to reinstall windows and all my software and having a problem opening jpg files in Flexi8.1 now. The files are opening to a larger physical size than what they are supposed to. For example if I save a jpg in photoshop thats 20.5"wide at 150 pixels/inch and try top open it in...

i have a customer who just brought me a bronze eagle. its about 18" wingspan & heavily oxidized. i am planning to wire wheel/scotchbrite the oxidation off. should i just size & guild? or etch primer, paint yellow then size & guild? how did they do it in the old days? i want to do it right &...

I need a quote for cutting out this shape. Approximate size is 44" x 14.5". The main substrate is a piece of Dark Bronze Dibond which I currently have. My client wants it to have a dimensional aspect so I was thinking of bonding it to a 1/2" thick piece of foam core or PVC. It is an indoor...

Hi everyone. Need some advice. What is a good laser engraving machine to purchase for use in a confined home office space that may not be able to use exhaust. Size preferably 12 x 24. Any suggestions?

Looking for a vendor that cuts steel, I have already contacted Big Blue Saw since they are listed as a MM here. Are there any others who cut steel? We have a customer who is looking to get some “budget” steel cut for an RV park they are opening The specs that we know Material: Steel...

I have quite a few backdrop stands I need to move. Easy Backboard with Velcro BBRF/2 Lights in Soft Black Case Size = 3 Meter x 3 Meter (9.84’x9.84’) Wholesale cost 175.00 OUR PRICE 100.00 + shipping We have 23 in stock Popup Backdrop with Magnets BB-M/2 Lights in Hard Black Case Size =...

Hello! Im using a CG-160FX II with FineCut and Im having problems with the sizing. I was cutting circles and in the middle of the sheet it stopped cutting smoothly. I got it back to where it will cut smooth but its not cutting the right size now. I'm cutting with a 60 degree blade and have...

I've always used 54" wide laminate. However, the ideal width would be either 53" wide or 53.5" wide. Does anybody know if such an item exist, and if yes, where would acquire such an item? Thanks!

Here is a video I made on how to load 54" media into a Mutoh 1204 (which is designed to only accept up to 50" media) ENJOY! :thumb: http://www.youtube.com/watch?v=eG2nFqZC2zo&feature=youtu.be

We often need one board cut in a custom size out of a material that we can't easily cut at our shop - like 080 aluminum. Does anyone have a source for small quantity, custom size boards? Thanks for your help! - Marie

Can anyone help me? Hello everyone .... I have an Anagraph AE 75e and VMPro 2.95 When I plot a 5 in square it cuts app. 5.062 in. (1/16 for every 5 in) I cannot find where I can change the proportion so it will adjust the size to my plotter. When I used to work on an ioline you could plot a...