technical help

We've been experiencing issues with our SP-300 and finding a tech rep that can help us out. Anyone here a on-site tech that is available for hire or know of one that can refer us to? Authorized Roland Techs are getting difficult to get out and merging supply companies don't support Roland...

So someone had shared with me the way to get into the maintenance mode of my Mimaki UCJV300 by holding down F1 and F3 buttons on the printer at boot. It appears Mimaki has updated the process. I suspect they [Mimaki] added a specific time count to hold it as I caught the tech still using the F1...

After printing a large amount of motives with more than 90% yellow, we keep getting a problem with one or more of the yellow nozzles. They keep shooting out yellow ink on the complete width of the printer, and we get a yellow line throughout our whole printing. As I wanted to clean the head...

After not using my cjv30-160 for a month, The machine won’t print black or cyan. Looking for anyone private who could help with flushing the tubes or any other ideas. I hope it will not require a new print head. I’m located in Paramus NJ. Thank you!

problem solved, sorry - just cant delete the thread...

So I have a Mimaki CJV30-160 and a recently moved shop locations. At my previous shop the Mimaki worked fine without any issues. Now at my new shop I have upgraded computers and can't get my Mimaki to connect at all. It wont even connect to my old computer or any for that matter. The...

our shop has a graphtec ce5000-60 24-in plotter that quit on us around the begenning of september right when we upgraded to a summa D160R. waht i have tried so far to test comunication : 4 diferent computers (1 windows 10 64 , 3 windows 7 64) 3 diferent usb cable lengths ranging from 3 feet...

Two questions: 1) Where is the best place to buy replacement DX4 print heads? 2) does anyone have a video or step by step procedure for replacing heads on a Roland SC-540? Thanks! David.

I am a new user on the digital printing scene. My cjv 30 will NOT cut after print??? I am stumped and feel as though i have tried everything. I am looking to talk to a person by phone who has used or is currently using a mimaki w/fine cut 8 and raster link pro5.

I replaced my head but changed the wrong head rank. How do I find what the head ranking was before? or is there anyway to find a head ranking or to enter a generic ranking to get this going?